Eunice 1/4-Inch (6 mm) ID Fuel Line Hose, 10 ft NBR, 300 PSI
Product description
Strengths
For repairs that call for a 1/4-inch (6 mm) inner-diameter fuel line, the Eunice hose provides a 10-foot length of NBR rubber for routing fuel and other listed fluids in automotive and engine systems. Its oil-resistant material and 300 PSI working pressure make it a practical choice when replacing a section of hose or setting up a custom run. The length gives you room to route the line to suit the installation and cut it to the needed span.
The hose is designed to convey gasoline, diesel, biodiesel fuel, engine oil, or water. What matters most for a replacement line: matching the connection size and the demands of the application? This hose’s stated inner diameter and pressure ratings give you concrete details to compare with your system before installation.
Buyers describe the hose quality favorably, while opinions on value for money are mixed. The documented material, size, and ratings help keep the choice grounded in the requirements of the job.
Quick overview
- Type: Fuel line hose
- Inner diameter: 1/4 inch (6 mm)
- Length: 10 ft
- Material: NBR rubber
- Working pressure: 300 PSI
- Burst pressure: 1.8 MPa
- Temperature range: -40°F to 248°F
- Included components: Clamps
Everyday use
This hose is intended for conveying gasoline, diesel, biodiesel fuel, engine oil, or water in vehicles and other listed automotive applications. For a practical repair, identify the route from the source to the connected component, then cut a suitable section from the 10-foot length. Installation uses hose barbs and fuel line clamps, match the fittings to the hose and secure the connections for the specific setup. Check that the application’s pressure is within the hose’s working rating before fitting it.
A long hose section is useful when the repair needs a custom route or when you want material available for more than one cut. By contrast, a pre-cut replacement is a more direct choice when its length already matches the repair. The Eunice hose offers flexibility in routing while keeping its inner diameter and pressure specifications clear for selection.
Before you decide
What is the hose’s inner diameter? It has a 1/4-inch (6 mm) inner diameter, a key measurement for matching the line to the intended fittings and system.
Which fluids is it designed to convey? The listed applications include gasoline, diesel, biodiesel fuel, engine oil, and water. Check the pressure requirements of your application against the hose’s stated 300 PSI working pressure.
How is it installed? The hose is installed using hose barbs and fuel line clamps. The product listing also identifies clamps among the included components, select barbs that suit the connection points in your setup.
When it makes sense
Choose this Eunice hose when a repair or custom routing job calls for a 1/4-inch (6 mm) ID line, an NBR rubber construction, and a 10-foot length. Its listed fluid applications, 300 PSI working pressure, and stated temperature range help you assess its fit for an automotive or engine-system task. For a replacement where exact routing matters, the cut-to-length format lets you plan the run around the installation rather than relying on a fixed pre-cut section.