EconoMe TV Wall Mount Full Motion 65"
Product description
This full-motion TV wall mount provides flexible positioning for flat screens, making watching from different seating areas easier while reducing glare. The EconoMe design fits most 26 to 65 inch TVs and includes tilt, swivel and rotation adjustments to fine-tune viewing angles for living rooms, bedrooms or conference spaces.
Key Points

The mount allows a tilt range of +5° and -10° and a swivel of +/-45°, so screens can be angled toward viewers across the room. It also offers small leveling and rotation adjustments of about +/-3° to correct installation alignment. The articulating arm extends up to 14.1 inches for better viewing distance and folds to a low-profile 3.15 inches when not in use, keeping the installation neat. Consider that this unit requires proper wall support, such as 12 or 16 inch wood studs or concrete, and you should verify your TV’s VESA pattern and weight before mounting. 😊


Technical Specifications

- Name: ELIVED EconoMe TV Wall Mount
- Compatible screen size: 26–65 inches
- Maximum load: 99 lbs (about 45 kg)
- VESA compatibility: up to 400 x 400 mm
- Extension from wall: 14.1 inches
- Flush profile: 3.15 inches
Advantages



The six-arm articulated steel frame increases stability and minimizes wobble during adjustment, which helps maintain a secure hold even when the mount is extended. Installation hardware and step-by-step instructions are included, which the manufacturer indicates can allow setup in about 10 minutes for users comfortable with basic tools. This model balances a slim profile with a wide range of motion so it works for rooms where a close-to-wall look is preferred but occasional repositioning is needed. 🔧
Usage Recommendations

Before installation, measure your TV’s VESA holes and total weight to confirm compatibility with the specified 400 x 400 mm pattern and 99 lb capacity. Use the recommended stud spacing or solid masonry anchors for reliable support. When adjusting the arm and tilt, move the screen slowly and check that cable routing has enough slack to avoid strain. Note that manufacturer coverage is available for 10 years according to the product information, and heavier or unusually shaped displays may require a different mounting solution. 📏
Products with discounts that might interest you
- ELIVED YD0085 Pillar TV Mount (32"–75") for Full Motion, No-Drill Column Installation
- Anker USB-C to HDMI Cable 6ft, 4K@60Hz
- c-mounts C-MOUNTS Full Motion TV Wall Mount for 37–75" Curved & Flat TVs (Dual Articulating Arms)
- HCMOUNTING Pre-Assembled Corner TV Wall Mount
- IWORKBOARD Full Motion TV Monitor Wall Mount Bracket (13–32 in, Max VESA 100x100mm, up to 33 lbs)
- JSAUX USB C to HDMI Cable 10ft 4K@60Hz
- LvShuLiangPin Anteel Silicone Suction Mount 24️⃣
- monTEK 0.77" Ultra Slim TV Wall Mount for 43-90 Inch TVs
- PERLESMITH PSMFK9 Full-Motion TV Mount 65"
- USX STAR Corner TV Wall Mount Long Arm (Full Motion) for 37–84" TVs
- WALI CM2665 Ceiling TV Mount 110 lbs
- Zettum Outdoor TV Cover 32 Inch (600D Waterproof) for 28–32" Flat Screen TVs
- Garnetics Outdoor TV Cover 65 Inch (Waterproof, Weatherproof) with Smart Shield Screen Protectors
- monTEK Heavy Duty TV Wall Mount for 60–140 inch XXL TVs (Up to 275 lbs) with 25” Articulating Arm
- MOUNTUP Height Adjustable TV Wall Mount for 26-55 Inch TVs (400x400 VESA) with Full Motion
- Govee LED Light Bars 106in TV Backlights
- Mounting Dream TV Wall Mount 26-55 inch
- Replacement 2-Pack Remote Control for VIZIO Smart TVs (XRT140 / XRT136 compatible)
- Universal for LG Smart TV Remote Replacement Pack of 2
- USX MOUNT 42-82 Inch TV Mount
- Perlegear Ultra Slim TV Wall Mount (1.1" Low Profile) Full Motion for 42–90" TVs, VESA 200x200–600x400, 132 lb Capacity
- monTEK Heavy Duty TV Wall Mount 165 lb
- ELIVED TV Wall Mount, 21.7-Inch Arm
- XINLEI MA1330W TV Wall Mount: Full Motion Bracket for 13–32 inch TVs



