Dickinda Model 1 Flying Insect Trap Refills, 10-Pack for M364/M364A

When the adhesive board in a compatible indoor flying insect trap is full, these Dickinda refills provide replacement cartridges so the device can continue catching insects. The pack is listed for M364 and M364A traps, and each cartridge uses an adhesive surface rather than acting as a trap on its own.

Peel away the protective film, then slide a cartridge into the device with the adhesive facing the lamp. Replace it when the surface is covered, the product description also suggests weekly replacement for better adhesion.

Getting the most from it

These are replacement parts, not a standalone insect catcher. You’ll need a compatible flying insect trap to use them, so the main buying decision is whether your device is an M364 or M364A. The listing describes the adhesive as odorless and says the refills are suitable for homes with children and pets when used as directed, follow the device and refill instructions during installation and replacement.

For a practical routine, keep a fresh cartridge available and check the adhesive surface as part of normal trap upkeep. If it is covered with insects, remove it and insert a new one. That makes this pack relevant to someone maintaining an existing light-based trap, rather than someone looking for a complete pest-control device or a solution that works without the compatible unit.

What stands out

The straightforward peel-and-insert setup avoids a separate power source for the refill itself. The adhesive captures flying insects by physical contact when used with the compatible trap. That is a different approach from buying a complete device: if your current trap is working and only its glue board needs replacing, a refill keeps the purchase focused on upkeep. If you do not already own a compatible unit, these cartridges cannot serve the same role by themselves.

Buyer feedback is favorable about ease of installation and fit for some devices, but reports on effectiveness and stickiness are mixed. Some buyers say the boards catch insects, while others report limited catches or adhesive that does not feel sticky enough. Compatibility reports about Zevo units also conflict, so those comments should not override the listing’s stated M364 and M364A compatibility. It suits you if you have one of the listed traps and want adhesive replacements, Not the best choice if you need a standalone trap or are relying on an unlisted device fitting.

Product specs

• Type: Adhesive refill cartridges for an indoor flying insect trap
• What’s included: 10 refill cartridges
• Compatibility: M364 and M364A flying insect traps
• Dimensions: 3.8 x 3.1 x 0.06 inches
• Color: Blue
• Power: None required for the refill
• Reference: Model 1

Is it worth it?

This pack makes sense as a maintenance purchase when your trap is specifically an M364 or M364A and its adhesive board needs replacing. The peel-off cover and slide-in installation keep the process simple, while the replace-when-covered guidance gives a clear cue for changing a cartridge. The key trade-off is that results depend on the compatible trap and the adhesive board’s ability to catch insects, buyer experiences on both catch rate and stickiness are not uniform. Choose it for replacing boards in a listed device, not as a substitute for buying a complete trap. If your unit is another model, confirm the fit before treating these refills as a match.