Xiatiaosann Solder Wick Braid with Flux and Desoldering Sucker (1.5mm, 2 Pack, 150cm each)
Product description
What it is
Xiatiaosann’s Solder Wick Braid is a 1.5 mm wide copper braid designed for fast, effective solder removal. Supplied with flux and paired with a desoldering sucker, this kit is aimed at electronics repair on PCB boards and other small-scale assemblies. The braid uses a pure copper flat needle braided structure, intended to be soft enough to wick solder quickly while also promoting easier cleaning after use.
What it’s for
This braid is primarily used to absorb molten solder from pads and joints, helping to clear solder without excessive heat transfer to surrounding components. The flux supplied with the wick helps improve wetting and capillary action, while the included desoldering tool offers an additional method to lift molten solder. The 150 cm length provides a reasonable working span before needing to re-cut or replace.
Key features
- 1.5 mm width and 150 cm length per piece
- Pure copper, braided flat needle structure for rapid heat conduction and reliable capillary action
- Fluxed, no-clean formulation intended to minimise residue
- Anti-oxidation and anti-corrosion properties designed to improve durability
- Desoldering sucker included for alternative removal method
- Pack of 2, suitable for workshops, schools, home projects and professional repair
What stands out when you use it
On the bench, the braid’s copper construction holds heat well and appears to wick solder efficiently from terminals with manageable flux residue. The combination of wick and desoldering tool can speed up pad cleaning and reduce the risk of lifting pads when used with steady technique. It isn’t a miracle cure for overly large joints or leaded through-holes, but for routine rework it behaves as a practical, workhorse option.
Limitations and caveats
It’s not a single, all-in-one replacement for every desoldering scenario. For very dense or large joints, recovery times may vary and the braid may need to be used in stages. The flux performance, while no-clean by design, will still leave some residue that you’ll want to clean if you’re aiming for a pristine board. If you prioritise ultra-high precision or surface-mount work at the smallest scales, consider whether the 1.5 mm braid is the best fit for those micro-pads.
Who it’s for
Ideal for hobbyists, students, DIY enthusiasts and light professional use where quick solder removal is beneficial. It also suits classrooms and repair shops that need a reliable, straightforward desoldering solution without purchasing multiple, separate tools.
Who it’s not for
If you work mainly with dense SMT land patterns, micro-BGA work or need ultra-fine control at the sub-millimetre level, this braid may feel less optimal than smaller or more specialised tools. Likewise, if you require a kit without flux or without a desoldering sucker, this combined package won’t be the best fit.
When it makes sense to buy
Consider this kit if you want a ready-made desoldering setup that pairs a no-clean fluxed wick with a desoldering suction option, at a practical price point for general electronics repair. The 2-pack gives you spares for future use or for two projects without extra sourcing.
What to check before buying
- Confirm your typical pad size and whether a 1.5 mm wick fits your needs
- Decide if having a fluxed wick reduces cleaning steps is important for you
- Ensure you have a compatible desoldering tool or expect to use the included sucker for quick lift-offs
Practical comparison in context
For everyday board repair, this approach is a balanced option between manual wick work and suction assistance. It’s reasonable to compare with separate wick and suction tools if you already own a preferred desoldering method, this kit offers convenience and a compact setup for standard tasks rather than high-end, specialised desoldering in a busy pro environment.
FAQ
- How long is each wick? Each wick is 150 cm (5 ft).
- Does it come with flux? Yes, flux is included with the wick.
- Is the pack a single kit or multiple pieces? The kit includes 2 x 1.5 mm wicks and 1 x soldering sucker.
Is it worth it?
A solid pick if you want a practical, no-nonsense desoldering setup that blends both wick and suction tools. It may not be the best fit for highly specialised, micro-scale SMT work, but for general PCB repair and routine desoldering tasks it offers clear value for money.