SAILUN Heavy Duty Traction Aid Boards 10T recovery mats
Product description
This heavy-duty recovery board set helps vehicles get moving again when tyres lose grip on soft surfaces. Designed for use in mud, snow and sand, the pair of traction mats improves wheel bite so SUVs, trucks and motorhomes can recover under their own power. These vehicle traction mats are compact to store and come with a carry bag for roadside or off-road emergencies.
Key Points

The boards have a serrated surface that bites into tyre tread and into soft ground, reducing wheelspin and the risk of slipping back. They are made from impact-resistant polypropylene and resist heat and many chemicals, which helps them stay serviceable after repeated use. The set includes two sand mats plus an installation tool and a storage bag, making it straightforward to keep them in the boot or on a roof rack. ⚙️


Handling is comfortable thanks to ergonomic cut-outs that act as secure grips when placing or removing the boards. The dual-slope design helps guide a wheel up and out rather than letting it dig deeper, and the lightweight nature of each board makes them fairly easy to manoeuvre for one person. Note that performance figures are those stated by the manufacturer.

Technical Specifications
- Name: SAILUN Heavy Duty Traction Aid Recovery Boards (2-pack)
- Material: Polypropylene (PP)
- Load capacity: - 10 tonnes (manufacturer stated)
- Included accessories: - Carrying bag, installation tool
- Intended terrains: - Mud, snow, sand, dirt, ice



Advantages
The construction balances stiffness with a degree of flex so the boards can conform slightly under heavy loads while remaining resistant to cracking. This combination makes them useful for heavier vehicles such as trucks and motorhomes. They do not require another vehicle to pull the stuck vehicle out, which makes them practical for solo travellers and small groups. 🧭

A practical advantage is the compact stacking design, which saves space when stowed and makes multiple units easy to transport. They also offer a cost-effective alternative to mechanical winches for many common recovery scenarios, however consider that very deep bog or extreme conditions may still need additional recovery gear.
Usage Recommendations
Place the board directly in front of or behind the driven wheel, with the serrated face against the tyre, and drive slowly to gain traction. Clean off excessive mud or debris after use and allow the boards to dry before packing them away in the provided bag to prolong their condition. For frozen or icy surfaces, combine the boards with careful throttle control and low-range gearing where available, and remember that extreme loads or sharp rocks can increase wear.
Products with discounts that might interest you
- HOVVIDA Tyre Inflator 5200 mAh Portable Compressor
- WindGallop Digital Tyre Inflator 12V Air Pump ⛽
- Lamicall Car Tyre Inflator 150 PSI portable pump
- Toconv Tyre Repair Kit 32pcs compact tyre kit
- SEESII Electric Car Jack 5 Ton lift
- Ianulus Valve Extension (4-pack) – Tyre Valve Extenders Adapter with 2 Clamps, 18cm length
- Vulisox Corded Cordless Tyre Inflator 6000 mAh
- Fshyos Tyre Inflator 150 PSI portable pump
- CXWXC MTB bike pedals with 8 pins
- ERMWALR 20 Pcs M14x1.25 Wheel Bolts for BMW 🔩
- GEWAGE Road/Mountain Bike Pedals – 3 Bearings, CNC Machined 9/16" Flat Pedals with Removable Anti-Skid Nails
- eSynic 16-Piece Wheel Nuts Set for Ford (M12x1.5, 19mm Hex) Black Locking Nuts with Taper Washer
- GEWAGE Mountain Bike Flat Pedals (9/16") — wide non-slip nylon platform with CR-MO steel spindle
- febi bilstein 26377 Wheel Bearing Kit for select VW, Audi & Skoda models
- CXWXC Road MTB pedals with Cr-Mo axle
- HAFOKO Motorcycle Camera Mount Kit 47"
- KONG MING CAR 9/16 inch non-slip aluminium bicycle pedals with reflectors (9/16 bearing platform)
- HANDSONIC Training Handle for Kids
- Spurtar Steering Wheel Knob Spinner 2Pack
- Hornby R8201 Track Link Wire Pack for OO Gauge layouts (scale 1:76) – spare parts
- Wheel Lug Nut Caps 17mm Silver
- Alloy wheel centre cap 51877477
- Maypole 260 mm Replacement Pneumatic Wheel with Rubber/Plastic Tyre for Jockey Wheels (70 mm Tyre Width, 260 mm Diameter) – Suitable for MP437
- ATsafepro 1/2" Drive Torque Wrench 20–230 Nm



