Alloy wheel centre cap 51877477
Product description
A neat replacement for a worn or missing wheel centre cap, this 1 PC alloy wheel centre cap is designed to clip on securely and refresh the look of your Fiat 500. With a black finish and a red rim edge, it includes a 500 logo detail so your wheels look more complete again while staying simple to fit. According to the supplied part information, it matches the 2012 to 2017 Fiat 500 and uses part number 51877477. 🚗
The essentials
This alloy wheel centre cap is a single hub cover supplied as one piece, made to sit neatly over the wheel centre. The black base with a red tinted chrome effect edge and the 500 logo gives a more finished appearance than a bare hub. It is described as a brand new replacement, so it is intended to restore the look and uniformity of your alloy wheels.

Fitting is designed to be straightforward. The centre cap is supplied with a retaining ring on the reverse and it simply clips on, which can be helpful if you want a tidy upgrade without complicated parts. It also uses stated sizing for a better match, with an outer diameter of 134 mm and an inner diameter of 55 mm, so you are not left guessing.


A small detail, like the wheel centre cap, can make a visible difference to the overall wheel finish. If you are replacing a cap that has been lost, damaged, or is just looking tired, this replacement is a practical option for everyday driving and routine wheel maintenance. 🛞
It is worth bearing in mind that it is listed for specific Fiat 500 fitment, covering the 2012 to 2017 range. That means checking your vehicle and wheel requirements before ordering is the sensible step.

Tech specs
- Name: Alloy wheel centre cap hub cover
- Type: Wheel centre cap replacement
- Part number: 51877477
- Size: Outer diameter 134 mm
- Size: Inner diameter 55 mm
- Colour: Black with red rim edge and 500 logo
- Fitment: Fiat 500 2012 to 2017

What to know before you buy

If your current centre cap is missing or not holding correctly, a clip on hub cover is often the fastest way to bring the wheel appearance back to normal. This one is supplied with a retaining ring on the reverse, which is meant to support that clip on fit when you mount it.
You will also want to consider whether the logo and finish are the match you expect. The product description specifies a red tinted chrome effect edge and a 500 logo, with a black logo element, so it is not just a plain cap. That style choice can be a plus if you prefer the wheels to look consistent and intentional.
It’s a good fit if you have a Fiat 500 within the 2012 to 2017 range and you want a replacement centre cap that clips on with the supplied retaining ring. It might not suit you if you need a different part number or a different diameter range for your wheel, since the provided outer diameter 134 mm and inner diameter 55 mm are part of what makes the match work.
For fitting, the key point is that it is designed to simply clip on, so the installation should be quick once you have the correct cap for your wheel. If you take care during fitting to align it properly, it is more likely to sit flat and look right on the car. ✅
Products with discounts that might interest you
- ATsafepro 1/2" Drive Torque Wrench 20–230 Nm
- ERMWALR 20 Pcs M14x1.25 Wheel Bolts for BMW 🔩
- ERMWALR M12x1.5 Wheel Lug Nuts (5 Pcs) – For Toyota, Jaguar, Lexus, Mitsubishi with Mag Washer, Locking Style
- eSynic 16-Piece Wheel Nuts Set for Ford (M12x1.5, 19mm Hex) Black Locking Nuts with Taper Washer
- mizikuu 2 Pack Wheelbarrow Inner Tube 13 x 5.00-6 with TR13 Valve – Heavy Duty Replacement
- Hycline 6/7/8/9 Speed Freewheel 13-32T
- eSynic RRD500510 20pc wheel nuts 22mm
- ROCKBROS Aluminium Mountain Bike Pedals (9/16in) – Anti-Slip, Sealed Bearings, 303g
- eSynic 16 Pack Professional Wheel Nuts Set for Ford (M12x1.5) with 19mm Hex
- febi bilstein 26377 Wheel Bearing Kit for select VW, Audi & Skoda models
- Istn Microfiber Leather D Shape Steering Wheel Cover (Universal, Black/White) for 15 inch/38cm wheels
- KONG MING CAR 9/16 inch non-slip aluminium bicycle pedals with reflectors (9/16 bearing platform)
- Spurtar Steering Wheel Knob Spinner 2Pack
- Wheel Lug Nut Caps 17mm Silver
- Maypole 200 mm Replacement Steel Wheel for Jockey Wheel (Tyre Width 48mm) – 200mm Diameter, 300kg Max Static Load
- Maypole 260 mm Replacement Pneumatic Wheel with Rubber/Plastic Tyre for Jockey Wheels (70 mm Tyre Width, 260 mm Diameter) – Suitable for MP437
- GEWAGE Mountain Bike Flat Pedals (9/16") — wide non-slip nylon platform with CR-MO steel spindle
- HOVVIDA Tyre Inflator 5200 mAh Portable Compressor
- Fshyos Tyre Inflator 150 PSI portable pump
- Lamicall Car Tyre Inflator 150 PSI portable pump
- CXWXC Road MTB pedals with Cr-Mo axle
- LUTIFIX BT10 EPB emergency release tool
- WindGallop Digital Tyre Inflator 12V Air Pump ⛽
- RIIEYOCA 12V splitter adapter, 15A fuse
