PW-HTS0107IR(POC) HDMI Splitter Extender 1X7 Port Over Cat5e/Cat6
Product description
What it is
This device is an HDMI splitter extender that distributes a single HDMI input to seven outputs using Cat5e/Cat6 cables. On paper, it aims to simplify multi-room or multi-screen setups without needing multiple HDMI cables running back to the source.
How it works
The model supports transmission up to 60 metres over standard Cat6, with a maximum resolution of 1920x1080 at 60Hz. It uses Power Over Cable (POC), meaning a single power source powers the unit, which can be convenient when you want a cleaner setup away from mains sockets.
Key features at a glance
- 1 input, 7 outputs via Ethernet cable
- Cat5e/Cat6 compatibility for longer runs
- Up to 1080p/60Hz video support
- POC power option reduces clutter by needing only one power supply
- IR remote control and IR transmission for simple control
- EDID function to stay compatible with a variety of displays
Real-world performance notes
On the page, the focus is on a straightforward multi-display arrangement rather than cutting-edge 4K performance. If your layout involves TVs or monitors within roughly 60 metres, this setup could keep signals coherent, assuming cable quality and room lighting don’t introduce interference. The IR remote support is handy for quick switching, though the experience may depend on line-of-sight and room layout.
What to consider before buying
- If your primary need is 4K or higher refresh rates, this model limits you to 1080p@60Hz, so it may not be the best choice for future-proofing a home cinema or gaming rig.
- The success of the long Cat6 run depends on cable quality and installation, you may encounter signal degradation if the cabling isn’t properly terminated.
- POC is convenient, but you’ll want to verify that the single power source suits your location and power outlets, especially in dedicated AV racks.
- The EDID compatibility is described as broad, but in practice it can be sensitive to the exact display chain. Have a plan for testing with your displays to ensure a stable picture.
Who this is for
If you’re setting up a small multi-room or multi-display environment where 1080p is sufficient, and you value a cleaner power situation with IR control, this product can be appealing. It suits installations where rapid switching between displays is useful and the lack of multiple HDMI cables back to the source is a priority.
Who it isn’t for
Not ideal if you require 4K, HDR or very high refresh performance. If your room geometry or display count demands more than seven outputs or needs latest video formats, you’ll likely need a different solution.
Quick usage guide
Plan your layout, run Cat6 cables to seven displays, connect the single HDMI input, and power the unit via the POC option if practical. Use the IR remote to switch between displays and check that each screen presents a clean, synchronised image without audio issues.
Practical use case
A simple home office or living room setup with several TVs or monitors can benefit from a single HDMI source feeding multiple displays. In practice, you might watch the same content on different rooms and switch quickly without crawling behind AV gear.
FAQ
- Will this handle 1080p 60Hz reliably over 60 metres? Real-world results vary with cable quality and installation. Testing in your space is advised.
- Can I run this without the IR remote? Yes, but the remote adds convenience for switching between displays.
- Is it compatible with HDR? The base spec mentions up to 1080p@60Hz, HDR support isn’t specified, so assume standard dynamic range.
Final verdict
Is it worth it? Worth considering if your goal is a tidy, single-source, multi-display setup at 1080p with straightforward control. It’s not the best option if you need higher resolutions, tighter gaming latency, or advanced AV features. If those constraints align with your needs, this model offers a practical, value-oriented approach to expand HDMI reach over Cat5e/Cat6.