monTEK Full Motion TV Wall Bracket for 37-90 Inch TVs (up to 75kg) with 638mm Extension
Product description
What it is and who it’s for
The monTEK Full Motion TV Wall Bracket is a heavy‑duty mounting solution designed for large LCD/LED/OLED TVs from 37 to 90 inches. It supports VESA patterns from 100x200mm up to 600x400mm and a load of up to 75kg, making it suitable for many living rooms, bedrooms or small office setups where a wall‑mounted TV is preferred. It’s intended for installation on concrete, brick walls and on 12, 16, 18 or 24 inch wood studs, note that it should not be mounted on drywall alone. If you’re aiming for a clean, space‑saving living area, this bracket promises a discreet profile with practical adjustability.
How it works
Designed with dual articulating arms, the mount tilts ±15° without needing tools and swivels up to ±60° (range depends on screen size). It retracts to a slim 2.75 inches from the wall, reducing bulk while keeping cables managed with a Velcro strap for neater wiring. The screen can be level‑adjusted by ±3° after installation to fine‑tune alignment. The bracket is built from heavy‑duty steel and tested for stability, offering a solid anchor for larger displays.
What stands out and where it may fall short
On the positive side, the combination of a wide VESA range, strong weight capacity and substantial extension gives you plenty of flexibility for seating position, glare reduction and post‑install alignment. The ultra‑slim profile helps the TV blend with the room. However, the kit relies on solid wall construction and correct stud mounting, if your wall isn’t suitable or you’re unsure about drilling into brick or concrete, professional installation may be needed. Also, while the tilt is tool‑free, achieving perfect alignment can take some careful setup, especially with longer arms and bigger screens.
Who it’s for and who it isn’t the best fit for
It’s a sensible choice if you’ve got a sizeable TV (37–90 inches) and want to place it for flexible viewing angles with reduced glare. It suits living rooms and home offices where wall space is at a premium. It may not be ideal if your wall is drywall‑only without appropriate supports, or if you’re planning a lighter, smaller display where the robustness of this bracket would be excessive.
When it makes sense to buy
Consider this bracket if you need a sturdy, adjustable wall mount that can handle larger screens and offers substantial extension to clear furniture or enhance mounting options. If you value a discreet look, a slim wall profile and easy tilting to cut glare, this model could be a practical match.
What to check before buying
- Confirm your wall type supports the mounting requirements (concrete/brick or appropriate wood studs). If in doubt, verify with a professional.
- Measure your TV’s VESA pattern to ensure it fits within 100x200mm–600x400mm.
- Assess room layout to ensure ±60° swivel will cover your seating areas without obstruction.
- Check the weight rating (up to 75kg) against your TV’s weight plus any attached accessories.
Practical usage example
Imagine mounting a 55‑inch TV in a living room corner. With the mount’s full motion, you can tilt to reduce glare during daytime viewing, then swivel toward a sofa at 60° for edge‑to‑edge comfort. If you sit closer, you can draw the screen back to around 2–3 inches from the wall, when entertaining, you can angle it for a broader audience. The cable Velcro keeps the rear tidy, helping the space feel organised rather than cluttered.
FAQ
- What sizes does it fit? TVs from 37 to 90 inches with a VESA pattern of 100x200mm to 600x400mm.
- How heavy is it? Up to 75kg maximum load capacity.
- Can I install it on drywall? No, the guidance is for concrete, brick walls or wood studs, drywall alone is not recommended.
Final decision
Is it worth it?
Worth considering if you need a robust, adjustable, low‑profile mount for a large TV and you can confirm suitable wall supports. It’s a practical choice for steady positioning and flexible viewing angles, but not the best option if you’re mounting on drywall unsupported or want a lighter, simpler setup.