GONEO Type 2 EV Charging Cable 10M 32A

This Type 2 charging cable from GONEO gives straightforward home and public charging for compatible electric and plug-in hybrid cars, offering faster charging at up to 7.2 kW to reduce waiting time for daily use. It is a 10-metre, single-phase Mode 3 cable that connects Type 2 sockets and is useful for longer runs between vehicle and charging point.

Key Points

The cable supports up to 7.2 kW and a maximum current of 32 A, allowing many EVs to recharge at a practical pace during overnight or workplace charging. According to the manufacturer, the connector plating and ultrasonic welding reduce temperature rise and improve contact reliability, which helps during regular use. The 10 m length provides flexibility for awkward parking positions or when the charge point is not directly beside the vehicle. ⚡

Technical Specifications

• Name: GONEO Type 2 7.2kW 32A 10M
• Maximum power: 7.2 kW
• Current rating: 32 A
• Length: 10 m
• Compatibility: Type 2 mains sockets and CCS2 compatible vehicles that accept Type 2 plugs

Advantages

The cable’s build uses nylon PA66 and a high-quality TPU conductor sheath, which the manufacturer states is halogen-free, wear resistant and recyclable. The connector’s silver plating of around 8±2 microns aims to improve conductivity and corrosion resistance, extending useful life. It has been tested for durability, including repeated mating cycles and mechanical tests such as a 1 metre drop test and a 2 tonne load test, offering reassurance for daily handling and storage. 🚗

Usage Recommendations

Connect the cable only between the vehicle charge inlet and a compatible charging station or wallbox. This item is not a general extension lead and cannot be joined to other cables. Confirm that your car and the charging point support single-phase 32 A charging to achieve the stated 7.2 kW rate. If the vehicle or station has a lower maximum, charging will be limited by that equipment rather than the cable. Also check whether your vehicle uses a Type 2 7-pin inlet or CCS2 before use, since the cable is not compatible with Type 1, CCS1, CHAdeMO or GB/T systems. 🔌

Practical Tips

Store the cable in the supplied transport bag with the velcro strap to protect connectors and keep the boot tidy. Avoid kinking the cable and lay it without sharp bends while charging. Note that environmental conditions can affect performance; the product carries IP54-rated ingress protection and fire resistance classification to EN and IEC standards, with manufacturer-mentioned certifications such as TUV and RoHS. A three-year warranty and 30-day return or exchange terms are provided by the seller according to the product information, and customer support is available by email within 24 hours if required.