ANFLAG 7000A 12V Jump Starter with 160PSI compressor

This portable jump starter and air compressor from ANFLAG packs multiple roadside essentials into a single kit for drivers who want quick recovery and on-the-go power. It combines a high-current 12V car starter with an integrated 160 PSI inflator, a 26 800 mAh power bank with fast charging and an LED work light, making it useful for long trips, vehicle maintenance and outdoor activities.

Key Points

The unit delivers a very high peak current performance suitable for starting petrol and diesel engines up to 14 litres, and it includes jump leads and insulated gloves for safer handling. The built-in air compressor reaches up to 160 PSI and offers pre-set modes for cars, bikes and other inflatables, while an LCD screen shows real-time pressure to prevent overinflation. The power bank function supports PD fast charging and an EC5 output for powering 12V accessories, so it doubles as an emergency power source for devices and small 12V appliances. Note that charging the internal battery from zero to full is rapid according to the manufacturer, but the supplied mains charger is not included.

Technical Specifications

• Name: ANFLAG 8000A Jump Starter Power Pack
• Peak start current: 8000 A
• Inflator pressure: 160 PSI, pump flow 45 L/min
• Battery capacity: 26 800 mAh
• Fast charge input/output: 65 W PD, EC5 output 160 W
• LED light output: 600 lm, 4 lighting modes

Advantages

Having a compact, multi-function device reduces the need to carry separate items for starting, inflating and powering gear. The 600-lumen LED offers several modes including SOS and red strobe, which help with visibility during roadside repairs or signalling at night. Multiple safety protections are built in to reduce risks from reverse polarity, overheating or overcurrent, and the inclusion of insulated gloves adds an extra layer of protection when using the clamps.

Usage Recommendations

Before first use recharge the internal battery fully using a compatible USB-C charger to ensure maximum readiness. For inflating tyres use the pre-set car mode and watch the 3.3-inch LCD while the unit automatically cuts out at the target pressure. When jump-starting follow the three-step procedure indicated in the manual and wear the supplied insulated gloves to limit exposure to live terminals. Consider that the EC5 output can run small 12V devices, but heavier appliances may draw more power than the rated 160 W.

Practical Tips

Keep the kit in an accessible spot in the boot and familiarise yourself with the LED modes and compressor fittings. The package includes multiple inflation nozzles and a removable hose to service tyres, sports equipment and small inflatables. For storage, avoid leaving the unit fully discharged for long periods; periodic top-ups will preserve battery longevity according to standard battery care practices.