bokman Type 2 EV Charging Cable 32A, 5m
Product description
This Type 2 EV charging cable is a 5-metre Mode 3 lead designed for convenient home and public charging of compatible plug-in hybrid and electric vehicles, offering up to 32A and 7.2 kW on a single phase to reduce downtime and keep you moving.
Key Points

The cable supports 32A charging at 7.2 kW on one phase according to the manufacturer, suitable for many domestic wallboxes and public AC chargers that accept Type 2 connectors. Its 5 metre length helps reach charging ports without needing to reposition the vehicle, and the flexible construction aims to make handling and storage straightforward. Safety features are built into the design, with overvoltage, overcurrent and short circuit protection mentioned by the maker.


Technical Specifications

- Name: bokman Type 2 EV Charging Cable
- Current: 32A
- Power: 7.2 kW
- Phases: 1 Phase
- Length: 5 m
Advantages



The charging lead is finished with ergonomic grips to make plugging and unplugging easier, and the flexible jacket reduces tangling when coiling for storage. High-grade copper conductors are cited in the product details, which typically helps with heat management and consistent performance during longer charging sessions. It is broadly compatible with vehicles using the Type 2 standard, so you can expect to use the same cable across different models that share that inlet configuration 🚗.
Usage Recommendations

For routine overnight charging at home, this 32A single-phase cable will generally provide a faster alternative to lower-amp portable leads, as long as your wallbox or socket circuit supports that current. When using public chargers, confirm the station accepts Mode 3 Type 2 cables and follow local charging point instructions. Consider storing the cable indoors when not in use during prolonged periods of wet weather to prolong the life of the insulation, and inspect connectors regularly for debris or damage before each use 🔌.


Technical Details

- Connector type: Type 2 to Type 2
- Insulation: Thickened jacket with flexible design
- Conductors: High-grade copper wires
- Protections: Overvoltage, overcurrent, short circuit protection.

Note that performance and charge times depend on vehicle onboard charger limits and the power delivered by the charging point, according to the manufacturer.
Products with discounts that might interest you
- Gorffy Car Fuses 165pcs kit
- 10m Caravan Hook Up Cable (240V 16A) with 3-Pin Fly Lead Converter and Carrying Bag
- RING SMARTCHARGE 8A car battery charger 8A
- A2C Car jump starter 16800mAh portable charger
- Jump Starter Power Pack 4000A car booster
- I LITTON 1-2-Both-Off Battery Disconnect Switch (2 Pack) for 12V–48V Systems
- Alpicool Y15E 15L Compressor Car Fridge Freezer
- AIMAPOW Portable Car Battery Jump Starter 20000mAh
- NHOWIN 4000A Jump Starter Power Pack 12V
- NOCO Boost GB40 1000A jump starter
- Nilight 90015A Battery Switch 12-48V – Heavy-Duty Isolator for Car, Boat, RV
- URAQT 730 PCS Automotive Waterproof Electrical Connector Set
- Povasee 3000A jump starter for 12V vehicles
- ANFLAG 7000A 12V Jump Starter with 160PSI compressor
- bokman Type 2 EV charging cable 5 m, 32A, 22 kW
- Bolatus Battery Isolator Switch 200A for Vehicles
- Jumper Cables for Car Battery 4m 2000A
- GONEO Type 2 7.2kW Charging Cable (7m) – 1-Phase, 32A, with Carry Bag
- Topteng 4pcs Ignition Coil 90919-02240 – Direct Replacement for Toyota/Yaris/Scion
- Car Battery Hold Lock: Aluminium Alloy Battery Tie Down Bracket with 8/10" J-Bolts
