GLOTRENDS PCIe 5.0 riser cable 150mm
Product description
A 150mm PCIe 5.0 riser cable helps you rethink your PC build layout, particularly if you want a cleaner vertical GPU mount with a right angle design. The GLOTRENDS cable is built to support PCIe 5.0 x16 connectivity with peak bandwidth up to 64GB/s when used with compatible hardware, so you do not have to compromise your setup just to get the look and airflow you want. It also includes advanced EMI shielding and a robust power delivery layout for steadier performance under load 📌.
If you are planning a vertical mount, you may also appreciate the installation flexibility, including an adjustable screw hole distance for common bracket spacing. Keep in mind that hot swapping is not supported and you should avoid touching the gold fingers to help prevent fingerprints or contaminants that can affect signal quality. 😊
Key points
This GLOTRENDS PCIe 5.0 riser cable is designed for builds that need reliable PCIe signalling and tidy cable routing, especially when a vertical GPU orientation helps your overall case management. With a direct CPU connected PCIe 5.0 x16 lane on compatible systems, it aims to keep bandwidth performance aligned with what PCIe 5.0 can provide.
One of the main practical benefits is the right angle 90 degree format for a vertical GPU mount, which can make it easier to position the graphics card where it fits best in your case. It also focuses on signal integrity through enhanced EMI shielding, using double grounding and individually foil wrapped differential signal pairs. That matters if your system has other components that could otherwise introduce noise into high speed lanes 🔧.
You also get a power delivery arrangement that includes 12V support up to 78W via a 40 pin connector with dedicated 12V pins, plus 3.3V pins. This is intended to support stable power delivery when the GPU draws more under heavier workloads. It is not a general cable to swap in without considering compatibility, so it helps to match your CPU, GPU, motherboard and memory profile to the requirements described by the manufacturer.
Tech specs
- Type: PCIe 5.0 x16 riser cable
- Length: 150mm
- Connector: 40 pin connector
- Power delivery: 12V up to 78W
- Power pins: 10 pins dedicated to 12V, 6 pins for 3.3V
- Signal integrity: enhanced EMI shielding with double grounding and individually foil wrapped pairs
- Conductor material: 30AWG silver plated copper
What’s included
You get the 150mm PCIe 5.0 riser cable packaged in anti static bags for safer handling during installation. The cable is intended to be used as part of a vertical GPU mount build with the included right angle 90 degree design. Since installation involves aligning screw hole spacing, it is worth checking your case bracket distance before fitting the riser into position.
The manufacturer guidance also notes that you should not touch the gold fingers. Fingerprints or contaminants may reduce signal quality, so handle the connectors carefully by the edges. If you are planning a build that changes components or power states, note that hot swapping is not supported for this setup 🧩.
What to know before you buy
It makes sense if your goal is a vertical GPU mount and your hardware matches the compatibility notes. According to the manufacturer, CPUs should be Intel 13th Gen and above or AMD Ryzen 8700 and above, and GPUs should be GeForce RTX 50 Series or AMD Radeon RX 9000 Series. Motherboards should be Z790 and newer models, and the recommendation is 32GB dual channel DDR5 6000Hz or higher, though your exact configuration will still depend on how your system is built.
You’ll like it if your motherboard provides a direct CPU connected PCIe 5.0 x16 slot, as the cable is designed around that lane connection for optimal performance. Not every PCIe slot will behave the same in every system, so it is worth confirming your board layout before committing to the install. It might not be a great match if your build needs hot swapping support, as the manufacturer specifies that this is not supported.
How to use it
Start by powering down and fully disconnecting your system before fitting the riser, as standard installation steps apply for hardware changes. Next, check the screw hole distance on your case or bracket, because the cable supports adjustable screw hole spacing of 97 to 128 mm to suit common sizes. Then align the riser carefully and secure it so the 90 degree right angle positioning works cleanly for your vertical GPU mount.
When handling the connectors, avoid touching the gold fingers and keep the contact area clean to help protect signal quality. After installation, confirm that your CPU, GPU and motherboard meet the stated PCIe 5.0 lane and series requirements. If any part of your system falls outside those guidance points, the riser may not deliver the intended PCIe 5.0 x16 performance.
Tech summary
The GLOTRENDS 150mm PCIe 5.0 riser cable focuses on delivering PCIe 5.0 x16 connectivity with strong signal integrity measures and a power delivery design intended for stability. It uses advanced EMI shielding, 30AWG silver plated copper, and a connector layout that includes 12V up to 78W support. For builders using compatible RTX 50 or RX 9000 class GPUs and a Z790 or newer motherboard, it is a practical way to support a vertical GPU mount without giving up the bandwidth goal.