ELEGOO PLA Filament 1.75mm 1kg spool for FDM printers 🖨️

This 1.75 mm PLA filament is a general-purpose spool intended for everyday FDM printing, offering a glossy white finish and straightforward setup for prototypes, models and household parts. With a lower recommended printing temperature and reduced warping, it helps to get consistent layers quickly, especially for users looking for easy-to-print filament.

Key Points

The spool arrives neatly wound to minimise tangles and feeding problems, which reduces failed prints caused by snags. According to the manufacturer, the filament is pre-dried and vacuum sealed to limit moisture uptake, so clogging and bubbling issues are less likely. The material emits little to no odour while printing, making it more pleasant for use in small workspaces or shared rooms, and the surface finish presents a glossy look that suits display pieces.

Prints benefit from reliable layer adhesion and smooth feeding, which helps when producing detailed parts or multiple identical items. This filament is presented as a 1 kg spool, weighing approximately 2.2 lbs, that fits most FDM 3D printers using 1.75 mm filament. For hobbyists and classroom settings it offers a simple choice that keeps setup time low and reduces trial-and-error. 🎨

Technical Specifications

• Name: ELEGOO PLA Filament 1.75mm White 1KG
• Diameter: - 1.75 mm
• Dimensional accuracy: - ±0.02 mm
• Net weight: - 1 kg (2.2 lbs)
• Colour: - White

Advantages

This PLA filament is low warp, so large flat surfaces or thin-walled parts are less prone to lifting from the bed compared with some generic materials. The lower melting temperature makes nozzle tuning faster and can reduce stringing when retraction settings are adjusted. For users printing indoors, the low odour is a practical comfort feature. Note that PLA is biodegradable under industrial composting conditions according to common material properties, so it differs from more heat-resistant engineering plastics.

Usage Recommendations

For best results, print with a nozzle temperature in the range typically specified for PLA on your printer, and use a heated bed if available at low temperatures to improve first layer adhesion. Store the spool sealed when not in use to preserve dryness and avoid brittleness, and inspect the filament path when swapping spools to prevent tangles. Consider lowering cooling fan speed for larger parts to aid layer bonding, and increase infill or wall thickness for functional components that require greater strength. 🛠️