ELEGOO PLA+ 1.75mm White 2kg filament 🖨

This PLA+ filament offers tougher, more impact-resistant prints while keeping the ease of standard PLA, making it a practical choice for functional parts and detailed models. The white 1.75mm filament is supplied as two 1kg spools, so you have 2kg of usable material for longer prints and rapid prototyping. It is suitable for most FDM 3D printers and aims to reduce common printing interruptions such as tangles and clogging.

Key Points

The filament is promoted for higher toughness and improved impact strength, which helps when printing mechanical components or objects that need greater durability. It has a glossy surface finish and strong layer bonding, which can result in smoother exteriors and fewer issues with layer delamination. For hobbyists and small workshops, the neat winding and vacuum sealing cut down moisture exposure and reduce the chance of bubbles forming during extrusion 😊.

Manufacturing tolerances are tight to support steady feeding through extruders. The product is dried and packed to limit moisture, and the spool design aims to prevent tangles and snap during long jobs. Consider that, according to the manufacturer, printing temperatures are slightly lower than some engineering filaments, so you can often print without extreme temperature settings. Also note that users with very specific colour matching needs may require post-processing or painting to reach exact shades.

Technical Specifications

• Name: ELEGOO PLA+ Filament 1.75mm White 2KG
• Material: PLA Plus.
• Diameter: 1.75 mm.
• Dimensional accuracy: +/- 0.02mm.
• Weight: 2 x 1 kg spools (total 2kg / 2.2 lbs per spool label reference).
• Colour: White.
• Compatibility: Most 1.75mm FDM 3D printers.

Usage Recommendations

Start with moderate layer heights and temperatures typical for PLA variants, then adjust extrusion multiplier if needed for tighter tolerances. If printing functional parts, allow for a small increase in infill and wall thickness to take advantage of the filament's improved toughness. For best results, store any opened spool in a dry box or sealed bag with desiccant to preserve filament quality over time. If you see any slight filament flexing during movement, check spool tension and reroute the filament path to avoid unnecessary resistance 🚀.

Practical Tips

Load each spool carefully to ensure the filament unwinds cleanly from the cardboard spools. When switching colours or materials, purge the hot end thoroughly to prevent contamination. If you encounter under-extrusion, check for moisture-related bubbles even though the product is sold vacuum sealed, and consider a short bake cycle in a filament dryer for persistent issues 🔧.