ANYCUBIC Water Washable 3D Printer Resin 2.0 (Easy Post-Processing) for LCD/DLP Printers, Grey 1kg
Product description
The essentials
If you print with an LCD or DLP resin machine, the mess after curing is often the part people dread most. This ANYCUBIC Water Washable 3D Printer Resin 2.0 is designed to make post-processing simpler by leaning on water cleaning, with a formulation aimed at low odour and better durability once cured. It’s also positioned as a precision resin, with low shrinkage and a detail-focused precision figure given by the brand.
A quick reality check: “water-washable” usually still means you need a sensible cleaning routine and to keep things tidy. But compared with alcohol-based workflows, the premise here is that cleanup can be easier, safer, and potentially more environmentally friendly—on paper, that’s a strong reason to switch.
What makes it different (and why you might care)
The headline feature is the water-based cleanup. The resin is described as using hydrophilic materials so you can remove residual resin with water instead of alcohol. For daily printing, that matters if you want fewer harsh chemicals around the work area, or you simply prefer a less involved rinse step.
The second big selling point is toughness after curing. The brand quotes an elongation rate of 16.62%, which is aimed at improving resilience and reducing the likelihood of cracking. That’s the sort of detail you notice later—especially if you print parts that need to be handled rather than only displayed.
It also comes with a “low odor” approach for indoor use, plus claims around anti-yellowing so models keep a more consistent look over time. The anti-yellowing note is particularly relevant if you’re printing white or transparent pieces where colour shift is more obvious.
Key points for everyday printing
The resin is marketed for high precision with low shrinkage, with a quoted precision up to 0.15mm. In practice, that’s aimed at miniature and fine-detail prints where edges and features can’t be too forgiving.
There’s also the promise of staying vibrant by reducing yellowing, which suggests a better long-term appearance than more basic commodity resins. Still, it’s worth remembering that final appearance can also depend on curing conditions and how the finished parts are stored.
Worth noting: the listing describes “wide compatibility” with LCD/DLP printers in general, and says it works best with Anycubic resin 3D printers. So if you own an LCD/DLP unit from another manufacturer, it may work fine, but you’re still safest following your printer’s resin settings and process guidance rather than assuming everything is identical.
Tech summary (from the provided info)
- Easy to clean with water (instead of alcohol) using hydrophilic materials
- Elongation rate: 16.62% (aimed at improved toughness after curing)
- Low odour formulation for storage and printing
- Precision up to 0.15mm with low shrinkage
- Anti-yellowing, designed to stay more vibrant after prolonged exposure
- Compatibility: LCD/DLP 3D printers, works best with Anycubic resin printers
- Colour: Grey
- Quantity/pack: 1kg
Where it shines, and where it may fall short
This resin looks like a sensible buy if you want to spend less time scrubbing and more time printing. The water-wash concept is especially appealing if you’re printing regularly indoors and you’d like a workflow that feels less harsh than alcohol.
It also makes sense if you care about more than “pretty prototypes”. The durability angle (toughness post-curing) points towards functional-ish parts and models that you’ll pick up, fit, or stress a bit.
However, it may not be the best choice if your use is extremely minimal or you already have an established workflow that you’re happy with. And if you’re chasing very specific results that depend heavily on exact exposure calibration, you may find you still need to dial settings for your particular LCD/DLP printer—nothing here removes that responsibility.
Practical use case
Imagine printing a set of small, detailed components for a model display: you finish the print, and instead of reaching for alcohol to get rid of surface residue, you rinse/clean with water as the hydrophilic design suggests. After that, you can move into post-curing without as much chemical fuss. If you’re making things with thin features, the low shrinkage and precision claim (up to 0.15mm) is also the kind of spec you’d look at because it influences how crisp the final geometry stays.
Should you buy it?
It’s a good fit if you print on an LCD/DLP machine, want water-based post-processing instead of alcohol, and you care about detail plus durability after curing—especially for indoor use where odour matters.
You may want to skip it if you already have a fully optimised resin workflow and you’re not bothered about switching post-processing methods, or if you’re expecting “no calibration ever”. Even with compatibility claims, resin results typically depend on your printer and how you cure and handle the parts.
If you’re mainly printing ultra-static decorative pieces, the toughness and anti-yellowing benefits may be less noticeable day-to-day. But if you make miniatures, detailed models, or anything you expect to last and look consistent, this is the sort of resin that could genuinely earn its place in your lineup.
Mini FAQ
Is it really water-washable?
The resin is designed to allow residual resin removal with water instead of alcohol, thanks to hydrophilic materials. You’ll still want to follow a sensible cleaning routine for best results.
Will it work with all LCD/DLP printers?
The listing says it’s compatible with all LCD/DLP 3D printers, and works best with Anycubic resin 3D printers. If your printer is from another brand, it’s still wise to stick to your machine’s resin and exposure guidance.
Does it smell less during printing?
Yes—there’s an emphasis on low odour for storage and printing, which is aimed at being more comfortable for indoor use.
Will prints yellow over time?
The resin is described as anti-yellowing to help keep models vibrant even after prolonged exposure. For white and transparent work, that’s particularly relevant, though storage and curing still matter.
What kind of prints is it aimed at?
The precision and low shrinkage claims point towards intricate details and miniature-style prints, where crisp features are a priority.