Ailuner Single Monitor Mount (Gas Spring) for 13–32" Screens, VESA 75x75 / 100x100

The essentials

If you’re trying to free up desk space or get your screen at a more comfortable angle, a single monitor mount like the Ailuner gas spring arm is exactly the kind of upgrade that makes day-to-day use feel less cramped. It’s designed for most 13 to 32 inch flat LED/OLED/QLED computer monitors, with a stated load range of 4.4 to 19.8lbs.

On paper, the appeal is clear: it offers a fully adjustable setup (height and multiple viewing angles) plus two installation methods—either a C-clamp on your desk edge or a grommet/holes setup. There’s also cable management built in, which is often the bit people forget about until cables start taking over.

What it is and who it suits

This is a single monitor arm mount intended for one screen. It’s a practical choice if you want to adjust height and tilt without manually moving the monitor around. It also suits people who share a desk, work from home, or simply like keeping their workstation tidy.

Worth considering if your monitor falls within the listed size and weight range, and you have a VESA pattern of 75 x 75 mm or 100 x 100 mm on the back. If you’re the kind of user who tweaks their setup throughout the day—typing, video calls, then switching to more reclined reading—this type of arm can save time and effort.

Key features that you’ll feel in daily use

The adjustment range is what makes this mount more than a basic stand. The arm uses a gas spring, giving a smoother feel when raising or lowering the screen. The stated height adjustment range runs from 16.0 cm up to 16.3 inches, so it’s built for people who need the monitor higher (or lower) than desk level.

Angle control is broad: you get 360° rotation at the base and also at the central joint, plus a horizontal swivel of 180° for the display. On top of that, there’s a tilt adjustment up to 90 degrees (up and down). In practical terms, that means you can swing the monitor out of the way, bring it closer to you, or tilt it to reduce glare.

One small detail that can matter more than expected: the base is compact and includes rubber padding. That helps with friction and stability on the desk surface—useful if your workspace sees regular movement.

Installation options (and the one thing to double-check)

Installation is described as straightforward, with tools included and an estimated setup time of around 15 minutes. The mount supports two approaches:

• A C-clamp that grips the edge of your desk (with a listed desk thickness range)
• A grommet/holes installation if your desk has suitable cut-outs

Here’s the limitation to be mindful of: you’ll need the correct VESA pattern on your monitor (75 x 75 mm or 100 x 100 mm). If your screen uses a different spacing, this mount won’t be the match you’re hoping for.

Also, since the system is height- and angle-adjustable, you’ll want to allow enough room around the monitor so it can move without hitting the wall, another monitor, or a desk accessory.

Tech specs

• Name: Ailuner Single Monitor Mount for 13-32 Inch Screens
• Type: Gas spring monitor arm with height-adjustable VESA bracket
• Screen size compatibility: 13 to 32 inch flat screens
• Supported weight: 4.4 to 19.8lbs
• VESA compatibility: 75 x 75 mm and 100 x 100 mm
• Rotation: 360° at the base and at the central joint
• Swivel (horizontal): 180° for the screen
• Tilt: up to 90° (up and down)
• Height adjustment range: 16.0 cm to 16.3 inches (as stated)
• Installation: C-clamp or grommet/clamp installation
• Materials (as described): metal frame with lightweight but tough plastic housing
• Cable management: built-in
• Load testing claim: gas spring fatigue tested to 20,000 cycles (as stated)

Where it stands out (and where it may fall short)

This mount is best viewed as a flexible desk upgrade for a single screen. The combination of height adjustment, wide swivel/rotation, and built-in cable routing makes it feel geared towards a clean, ergonomic setup rather than just holding a monitor in place.

It may not be the best choice if: - your monitor isn’t within 13–32 inches or the stated weight range - your monitor doesn’t use VESA 75 x 75 mm or 100 x 100 mm - you want something simpler with less movement (some people find a fully adjustable arm more than they need)

And depending on your desk layout, the impressive range of motion is great—but it also means you’ll want to plan clearance so the screen can swing safely.

When it makes sense

If you want an adjustable single monitor arm that can raise, tilt, swivel, and rotate—while keeping cables more controlled—this is the kind of mount that can genuinely improve everyday comfort. It’s also well-suited to home office setups where desk space is at a premium.

Mini FAQ

FAQs about the Ailuner single monitor mount

Is this compatible with my monitor brands? The description says compatibility with a range of brands, but the practical rule is VESA size and screen weight/size. Make sure your monitor falls within the listed 13–32 inch range and 4.4–19.8lbs, and that its VESA pattern is either 75 x 75 mm or 100 x 100 mm.

What installation method should I use—clamp or grommet? Choose based on your desk setup. If you have suitable desk thickness for the C-clamp, that’s straightforward. If your desk has holes for mounting, the grommet installation may be the better fit.

Does it include cable management? Yes—there’s integrated cable management described, which should help route cables more neatly.

How far can the monitor move? The mount is described with 360° rotation at the base and central joint, 180° horizontal swivel, and tilt up to 90°.

Final verdict

Ailuner’s single gas spring monitor arm makes sense if you’ve got a compatible monitor (within the stated size, weight, and VESA 75 x 75 mm / 100 x 100 mm) and you want real day-to-day adjustability without wrestling with a fixed stand. It’s not a fit if your monitor’s VESA pattern or weight/size is outside the range, and it’s worth checking desk clearance because the arm’s motion is extensive. If those boxes are ticked, it’s a solid, practical way to get a cleaner, more comfortable workstation.