Smartect 2-Core Braided Electrical Cable, White, 3 Metres, 0.75 mm²

Strengths

At 3 metres, this white, two-core braided cable gives a visible lighting project a fabric finish without requiring a long length. Its 0.75 mm² conductors are made from tinned copper, and the flexible construction is intended for lamp-making and decorative DIY. It suits a different need from a cable chosen simply to disappear: here, the covering can form part of the look. For a pendant light or chandelier where the cable will be on show, that texture may be useful, a more demanding installation may call for a different cable type.

The main advantage is the combination of a textile outer and a flexible two-core design. The product information describes it for luminaires that do not require grounding, rather than as a universal replacement for every lighting cable. It is also supplied with an illustrated English manual, which may help with understanding the installation, but the manufacturer says wiring should be carried out by a qualified professional.

Key features

This is a white, 2-core cable with a 2 x 0.75 mm² construction. The listed cable type is H03VV-F 300/300 V, and the product specifications also state 230 Volts. Its textile braid is intended to add a decorative finish to visible cable runs, while the flexible construction can be shaped for a DIY lighting design. The stated length is 3 metres, and the cable can be shortened if the project needs less.

The practical distinction is the number of cores. This two-core version is described for lamps without metal parts or a grounding requirement. A three-core cable with a protective conductor is the more appropriate approach for metal lamps, ceiling canopies or other equipment that requires grounding. The cable is intended to carry electricity, not to bear the weight of a lamp, so heavier fittings need separate secure fixings. It is not intended for direct use in damp or wet areas.

Practical tips

Plan the visible cable route before cutting, particularly if it will run around a pendant or form part of a decorative design. The 3-metre length gives a set amount to work with, shortening is possible, but cutting and wiring should be left to a qualified professional. Use suitable independent supports for the fitting rather than relying on the cable to hold it up.

It makes sense if you need a short, white textile cable for a lighting project that does not require an earth conductor and where the cable will be part of the finished appearance. It might not be a great match if the fitting is metal, needs grounding, or will be used in a wet area, those requirements call for a different installation choice. If you prioritise a plain, unobtrusive cable over a fabric finish, this decorative style may not be necessary.

Before you decide

Is this cable suitable for a metal lamp? The product information says the two-core version is for luminaires without metal parts or a grounding requirement. A three-core cable with a protective conductor is indicated where grounding is needed.

Can it be cut to length? Yes. The cable can be shortened, but the manufacturer specifies that cutting and wiring should be carried out by a qualified professional.

Can the cable support a heavy pendant? No. It is designed for power conduction, not as a load-bearing element, so use additional secure fixings for the lamp.

Is it worth it?

This cable is worth considering when the visible wire is part of a vintage or decorative lighting scheme and the project needs a 3-metre, white, two-core length. Its fabric braid and flexibility distinguish it from a basic cable selected mainly for an unobtrusive finish. The key buying decision is suitability, not appearance alone: confirm that the lamp does not require grounding, and plan separate support for its weight. For a grounded fitting or damp location, choose a cable and installation specified for those conditions instead.