Faithfull O-Shaped Manhole Keys, 200mm Zinc-Plated Pair with 10mm Ends

The bent O-shaped ends are designed to engage with compatible lifting points, while the triangular handles give gloved hands room to grip. These Faithfull manhole keys are supplied as a pair and measure 200mm long. They are intended for light-duty covers, recessed trays and access panels. That makes them a more specific choice than a general-purpose tool when you need a matching pair for this type of access point.

Highlights

Each key has a bent O-shaped end with a 10mm diameter and 25mm depth. The zinc-plated finish is intended to provide rust protection, and the triangular handles are shaped to give a positive grip, including when worn with gloves. Their mechanical operation keeps the design straightforward: there are no powered features or additional settings to consider.

The stated use is lifting and removing light-duty manhole covers, recessed tray types and access panels. The same basic task may come up around a property or during maintenance work, but the cover must have a lifting point suited to the O-shaped ends. These are not presented as universal keys for every cover design.

Customers describe the keys as effective and strong, and some say they offer good value. One buyer specifically mentions using them to lift hydrant covers. That feedback is useful as an indication of reported use, but the product description itself specifies light-duty covers, trays and access panels, so it should not be taken as confirmation of suitability for every hydrant cover.

Fit and sizing

At 200mm long, the keys are intended to be handled directly rather than used as long-reach tools. The key end is 10mm in diameter and 25mm deep, these measurements matter when deciding whether the ends will engage with the lifting points on a particular cover. The product information does not give a broader compatibility list, so matching the end dimensions to the access point is more useful than relying on the general term “manhole key”.

It’s a good fit if you need a pair of bent O-ended keys for the light-duty applications listed and can confirm that the cover has suitable lifting points. Better avoided if you need a tool specifically specified for heavy-duty covers or a different lifting-point design, the stated intended use here is light-duty.

Who it’s for

These keys are aimed at people who need to lift compatible access covers, recessed trays or panels and prefer a two-key set with a defined end shape and size. For occasional access work, the supplied pair and simple mechanical design offer a direct approach. If your priority is a tool for a different cover type, a product matched to that cover’s lifting points is the more relevant comparison.

The listing describes the tools as heavy-duty, while the stated applications are light-duty covers, trays and access panels. In practice, the application detail is the safer guide to choosing them: the heavy-duty wording does not establish that they are suitable for heavier covers. The buyer comments about strength are favourable, but they do not replace a check of the cover design or its lifting requirements.

What to clarify

What are the keys designed to lift? They are described for light-duty manhole covers, recessed trays and access panels.

What is included? The product is supplied as a pair of keys.

What are the key-end dimensions? Each bent O-shaped end is 10mm in diameter and 25mm deep, with an overall key length of 200mm.

Buying verdict

The Faithfull pair is worth considering when the O-shaped end dimensions match the lifting points and your task falls within the stated light-duty uses. Zinc plating, a gloved-hand-friendly triangular grip and the supplied pair make the design practical for straightforward access work. The main decision is compatibility: these measurements and the listed applications are more useful than assuming that a manhole key will fit any cover.