uxcell O-500 Rubber Drive Belt, 500 mm Inner Girth, 10 mm Width
Reviews
Price
Product description
Choosing a drive belt for a replacement job is different from selecting one for a new setup: the key is matching the belt to the pulley system and the required dimensions. The uxcell O-500 is a neoprene rubber V-belt with a 500 mm inner girth, a 10 mm top width and a 6 mm thickness, for compatible drive systems such as printer equipment.
Its trapezoidal profile wedges into a similarly shaped pulley groove to provide traction and alignment as it links rotating shafts. That makes the stated belt measurements and pulley profile useful points to match when selecting a replacement.

Usage tips
Match the O-500 belt’s 500 mm inner girth, 10 mm top width and 6 mm thickness to the requirements of the drive system. Its 40-degree angle and V-belt profile are designed to sit in a correspondingly shaped pulley groove. In a printer or other compatible machine, the belt links rotating shafts to transmit power, so the pulley arrangement is central to choosing the right belt.



For a replacement, compare the existing belt’s specified dimensions and profile with these measurements rather than relying on a general description such as “machine belt.” For a new drive setup, use the same dimensions and groove profile as selection criteria. The product is listed as compatible with printers and is also described for drive systems across automotive, agricultural, textile, printing, mining and office equipment applications.
Benefits

The neoprene rubber construction is described as resistant to oils, water and some solvents, supporting use in drive environments where contact with these substances may occur. Its trapezoidal cross-section seats in a matching pulley groove, helping the belt maintain traction and alignment while transmitting power between rotating shafts.
The belt is also described as distributing load across belt drives and offering wear resistance. Its outer fabric wrap is treated for oil and heat resistance. Together, these construction details make it suited to practical transmission tasks where the belt’s fit and material are relevant to ongoing machine operation.



Compared with choosing a belt by a broad application label alone, this O-500 gives specific fit details to work from: inner girth, top width, thickness and angle. That information helps narrow the selection to drive systems designed for those dimensions and a matching V-belt pulley.
Worth noting

This is a single black drive belt, made from neoprene rubber. Its stated measurements are 500 mm inner girth, 10 mm top width and 6 mm thickness, with a 40-degree angle. The fit depends on the drive system using a compatible belt profile and dimensions, check these against the machine’s belt or pulley requirements before installation.
A practical replacement scenario is a printer drive that needs a belt to connect rotating shafts. Matching the O-500 profile and measurements to the existing setup gives a clear basis for selecting the belt for that task.



Questions before you buy
What are the belt’s measurements? It has a 500 mm inner girth, a 10 mm top width and a 6 mm thickness. The stated angle is 40 degrees.
What is the belt made from? It is made from neoprene rubber. The material is described as resistant to oils, water and some solvents, and the outer fabric wrap is treated for oil and heat resistance.
How does the belt engage with a pulley? Its trapezoidal cross-section wedges into a similarly shaped pulley groove to provide traction and alignment while transmitting power between rotating shafts.
Should you buy it?
If your printer or machine drive calls for an O-500 V-belt with these measurements, this belt offers a clearly defined fit and a neoprene construction suited to power transmission. It makes sense if matching the belt profile and dimensions is central to your replacement or drive-system selection.
Products with discounts that might interest you
- uxcell F6202-2RS Flanged Ball Bearings, 15 x 35 x 11 mm, Double-Sealed, 4-Pack
- YXPOLYER PLA PLUS 1.75 mm Yellow PLA+ 3D Printer Filament, 1 kg
- ELEGOO PETG 3D printer filament, 2 kg
- DEEPLEE Silk PLA 3D Printer Filament, 1.75 mm, 2 kg, Silk Silver Grey
- ELEGOO 1.75 mm PLA 3D Printer Filament, 4 kg, Four Colours
- eSUN PLA Lite 1.75 mm 3D Printer Filament, Fire Engine Red, 1 kg
- GIANTARM 700-001-1216 Silk Gold PLA Filament, 1.75 mm, 1 kg
- HARFINGTON Double Split Shaft Collars, 4-Pack for 8 mm Shafts
- JAYO High Speed Matte PLA 3D Printing Filament, 1.75 mm, 2.2 kg Black
- MECCANIXITY Shaft Collar, 5/8" Bore, Double-Split, Set-Screw, Black
- Meuymeu Shiny Tricolor Silk PLA+ 3D Printer Filament, 1.75 mm, 4-Pack
- SUNLU 50 High Speed Matte PETG Filament, 1.75 mm, Black, 2 kg
- TINMORRY evo 1.75 mm Silk PLA 3D Printer Filament, Light Bronze, 1 kg
- GIANTARM M1 Mini 3D Printer with Auto-Levelling and Direct Drive
- ELEGOO PETG 1.75 mm Black 1 kg 3D Printer Filament, ±0.02 mm Accuracy
- SUNLU Silk PLA 3D Printer Filament, Light Gold, 1.75 mm, ±0.02 mm, 1 kg
- ELEGOO PETG 3D Printer Filament, 1.75 mm Black, 4 kg, 4 Spools
- SUNLU Silk PLA Plus 3D Printer Filament, Dual-Colour Red and Blue, 1.75 mm
- ELEGOO PLA Basic Refill 3D Printer Filament, Black, 1.75 mm, 4 kg
- SUNLU 50 High-Speed Matte PETG 3D Filament, 1.75 mm, Red, 1 kg
- ELEGOO MX-EL-3DF-PB0455 White PLA 3D Printer Filament, 1.75 mm, 4 kg
- SUNLU High Speed PLA Filament, 1.75 mm, 8 Colours, 2 kg
- eSUN PLA Filament, 1.75 mm, Cold White, 2 × 1 kg Spools, ±0.03 mm
- ELEGOO Matte PLA 3D Printer Filament, Matte White, 4 kg, 1.75 mm
