ELEGOO PETG 3D printer filament, 2 kg

For FDM printer owners who want PETG in two colours, this ELEGOO Rapid PETG pack pairs yellow and orange filament on cardboard spools. The listing describes it as a high-speed option, with printing speeds up to 600 mm/s and dimensional accuracy of +/- 0.02 mm. Its 1.75 mm format is stated to fit most printers that use that filament size, though the advertised speed should not be treated as a guaranteed result on every machine. It may suit practical parts or light-diffusing prints, but keeping the filament dry after opening is part of getting it ready to use.

Key specifications

The pack contains 2 kg in total, supplied as two 1 kg spools, with yellow and orange filament. Each spool uses a cardboard core, and the filament diameter is 1.75 mm. ELEGOO lists a maximum printing speed of 600 mm/s and dimensional accuracy of +/- 0.02 mm. Those are product claims, not a promise that a particular printer, slicer profile or part will deliver the same result.

PETG is positioned here between more basic PLA printing and a more demanding material choice: the description highlights ease of printing alongside toughness, flexibility and impact resistance. It also claims good light transmittance, less warping and low shrinkage compared with PLA. That makes the colour pair worth considering for a small light-diffusing cover or coloured household part, where the material and appearance matter as much as simply getting a print finished quickly.

Who it’s for

This is aimed at people with a 1.75 mm FDM printer who want to try PETG without buying a single large spool of one colour. The listing names both regular and high-speed printers, and gives examples including the Neptune 4 range, K1 series, Ender 3 V2, Kobra 2 series, M5 and M5C. Treat those as examples rather than a substitute for checking your printer’s filament requirements and setup.

Puede interesarte si you print functional everyday parts, want yellow and orange available in the same pack, or are exploring PETG for a project that benefits from some light passing through the material. The claimed lower tangling risk may also appeal if a messy spool has interrupted prints before. Puede no ser la mejor opción si you need a specific colour match, require a different filament diameter, or expect to print at the advertised maximum without adjusting your machine and settings.

Contents

The stated contents are two 1 kg spools of Rapid PETG, one yellow and one orange, for 2 kg altogether. The spools are described as cardboard, and the filament is mechanically wound with manual inspection intended to reduce tangles and breaks. There is no further information here about included accessories or storage packaging, so don’t assume a dryer or other printing supplies come with the pack.

One practical point matters after unpacking: the product instructions say to use the filament as soon as possible and dry it completely before using it again. If a spool has been left exposed between projects, that drying step is worth building into your routine rather than treating the material as ready straight from storage. The listing doesn’t provide a drying temperature or duration, so follow the guidance for your equipment and filament.

Antes de decidir

Does it fit my printer? The filament is 1.75 mm and is described as suitable for most FDM printers using that size. Check your printer’s requirements before choosing it, the listed model examples do not confirm every setup.

Are there two colours in the pack? Yes. The product name and description specify yellow and orange, with one 1 kg spool of each.

Will every printer reach 600 mm/s? The listing gives that as an upper printing speed. It does not establish that every printer or print profile will reach it, so base your choice on your machine’s capabilities rather than the headline figure.

Veredicto final

Choose this pack if you want two 1.75 mm PETG colours for functional prints or light-diffusing parts, and are prepared to manage moisture after opening. Its two-spool format gives you a straightforward way to work with yellow and orange without committing to one colour alone. Look elsewhere if you need a specific shade, a different diameter, or a guaranteed high-speed result: the listing gives a maximum figure, not a printer-by-printer performance assurance.