YXPOLYER PLA PLUS 1.75 mm Yellow PLA+ 3D Printer Filament, 1 kg
Product description
For makers who want a versatile yellow filament for functional parts, models and home projects, YXPOLYER PLA+ offers a practical material choice. What helps when a print needs to look good and handle everyday use? Its enhanced toughness is designed to make prints less brittle than standard PLA. The 1.75 mm filament comes on a reusable PC spool and is compatible with the AMS System and most FDM 3D printers.
Tips for day-to-day use

Use the recommended PLA settings as a starting point: the listed printing temperature is 190–220°C, with a bed temperature of 0–60°C. For Motion Mode, the stated settings are 220°C at the nozzle and 35°C at the bed, maximum volumetric speed is 21 mm³/s. Adjust to suit your printer and build plate. The recommended adhesion method is glue, and the filament’s vacuum-sealed packaging is intended to protect it from moisture before use.
A 1 kg spool gives you material for a range of projects, from prototypes and educational models to organizers, decorative pieces and household accessories. The yellow colour makes parts easy to distinguish or use as a visible accent. For a typical project, you could print a small holder or tray, then use the same spool for a matching set of practical parts. The 1.75 mm diameter suits many FDM setups, while the stated AMS compatibility can make it easier to use with a compatible multi-material system.



Strengths
This PLA+ is designed for improved toughness compared with standard PLA, supporting prints intended to cope with everyday handling. The manufacturer lists a tensile strength of 65 MPa and a notched Izod impact strength of 43 J/m. Smooth extrusion, a clog-free design and bubble protection are also intended to support consistent printing and clean-looking surfaces. Its stated low-odour formulation is suited to home and small-space printing.

The material is described as food-grade, with food-contact and skin-contact standards supported by laboratory testing. That makes it relevant for projects where material choice matters, such as certain household or pet accessories. As with any printed item, consider the finished object and its intended use when deciding whether it is suitable for contact with food.
What to know



The filament is made from polylactic acid, measures 1.75 mm in diameter and weighs 1 kg. Its reusable PC spool is designed to fit the AMS System, and the filament is described as compatible with most FDM 3D printers. That combination suits buyers choosing a ready-to-use spool for a broad mix of creative and practical prints, rather than a specialist material for a narrowly defined application.
Buyer feedback highlights smooth printing and appealing results, while experiences with bed adhesion and tangling are mixed. The manufacturer’s recommended glue adhesion method is a useful setup detail to keep in mind when preparing a build plate. The listed one-year manufacturer warranty is another detail for buyers comparing filament options.

What to clarify
What printers can use this filament? It is a 1.75 mm FDM filament described as compatible with most FDM printers and the AMS System. Check that your printer uses 1.75 mm filament and that your spool setup supports the PC spool.



Which temperatures should I start with? The recommended general range is 190–220°C for printing and 0–60°C for the bed. For Motion Mode, the listed settings are 220°C and 35°C respectively.
What kinds of projects suit PLA+? Its combination of toughness, surface quality and yellow colour suits prototypes, educational models, décor, organizers and functional household parts.
Final verdict
Choose this YXPOLYER PLA+ spool when you want yellow 1.75 mm filament for a mix of detailed models and useful everyday prints. Its reusable PC spool, stated AMS compatibility and toughness-focused PLA+ formulation make it a fitting option for makers who want one material for creative projects as well as functional FDM parts.
Products with discounts that might interest you
- MECCANIXITY Shaft Collar, 5/8" Bore, Double-Split, Set-Screw, Black
- Meuymeu Shiny Tricolor Silk PLA+ 3D Printer Filament, 1.75 mm, 4-Pack
- SUNLU Silk PLA 3D Printer Filament, Light Gold, 1.75 mm, ±0.02 mm, 1 kg
- TINMORRY evo 1.75 mm Silk PLA 3D Printer Filament, Light Bronze, 1 kg
- uxcell O-500 Rubber Drive Belt, 500 mm Inner Girth, 10 mm Width
- BGTEC Wood Grinding Wheel Set, 100 mm
- DEEPLEE PLA+ 2.0 3D Printer Filament, 1.75 mm, 2 kg, White and Grey
- ELEGOO PETG 1.75 mm Black 1 kg 3D Printer Filament, ±0.02 mm Accuracy
- eSUN PLA Plus PLA+ 1.75 mm 3D Printer Filament, Black, ±0.03 mm, 1 kg
- GIANTARM 700-001-1216 Silk Gold PLA Filament, 1.75 mm, 1 kg
- HARFINGTON Double Split Shaft Collars, 4-Pack for 8 mm Shafts
- JAYO High Speed Matte PLA 3D Printing Filament, 1.75 mm, 2.2 kg Black
- ELEGOO MX-EL-3DF-PB0455 White PLA 3D Printer Filament, 1.75 mm, 4 kg
- SUNLU High Speed PLA Filament, 1.75 mm, 8 Colours, 2 kg
- eSUN PLA Filament, 1.75 mm, Cold White, 2 × 1 kg Spools, ±0.03 mm
- ELEGOO Matte PLA 3D Printer Filament, Matte White, 4 kg, 1.75 mm
- ELEGOO MX-EL-3DF-PB0502 PLA 3D Printer Filament, 1.75 mm, 4 Colours
- uxcell F6202-2RS Flanged Ball Bearings, 15 x 35 x 11 mm, Double-Sealed, 4-Pack
- ELEGOO Matte PLA Refill 3D Printer Filament, 1.75 mm Black, 4 kg
- DEEPLEE Basic PLA 3D Printer Filament, 1.75 mm, 1 kg, Sky Blue
- SUNLU High Speed PLA Filament, 1.75 mm, 1 kg, Orange
- eSUN PLA Basic High-Speed 3D Printer Filament, 1.75 mm, Light Blue, 2 × 1 kg
- ELEGOO Matte PLA 3D Printer Filament, Navy Blue, 1.75 mm, 1 kg
- ELEGOO Matte PLA 3D Printer Filament 4 kg

