Meuymeu Shiny Tricolor Silk PLA+ 3D Printer Filament, 1.75 mm, 4-Pack
Reviews
Price
Product description
Each 250 g spool uses 1.75 mm PLA+ filament, giving you four colour combinations to explore across a range of FDM printing projects.
Three colours are co-extruded into one strand. As a printed piece turns or is viewed from another angle, its colours can shift into view, creating a layered finish for display models and decorative prints.

The silk surface adds a glossy look to the finished piece, so the colour effect can be part of the design rather than something you need to create with paint.
What to know



The bundle contains four 250 g spools, for 1 kg total. Its combinations are red/yellow/blue, red/blue/green, red/gold/purple, and black/blue/purple. This gives you distinct palettes for projects such as dragons, vases, ornaments, and custom crafts, without relying on a single-colour spool or a conventional rainbow effect.
A 1.75 mm diameter with a stated tolerance of ±0.03 mm supports consistent feeding and extrusion. The spools are neatly wound to help reduce tangles during printing. The filament is intended for FDM 3D printers that support standard 1.75 mm filament, making it suitable for decorative models, prototypes, and display pieces. Colour and gloss can change with viewing angle and print settings, so the same model may show its finish differently depending on its shape and how it is printed.

Care & maintenance
Each spool is individually vacuum-sealed with desiccant to help protect the filament from moisture during storage. Open only the colour combination you need, and keep the remaining spools sealed for later projects. After opening, store the filament in an airtight container and keep it dry. If it has been stored for a long time, dry it before printing.



Tips for day-to-day use
Use the recommended settings as a starting point: a nozzle temperature of 200°C–220°C, print speed of 0–300 mm/s, and heated-bed temperature of 0°C–60°C. Fine-tune these settings for your printer, nozzle, model, and desired finish. For a practical first project, try a decorative model with curved surfaces, such as a vase or dragon: changes in viewing angle can bring different colours in the strand into view. The four separate spools also make it easy to switch palettes between projects while keeping unused colours sealed.

Questions before you buy
Will this filament work with my 3D printer? It is designed for FDM printers that support standard 1.75 mm filament. Check that your printer uses this filament diameter before loading a spool.



What colours are in the bundle? The four tricolour combinations are red/yellow/blue, red/blue/green, red/gold/purple, and black/blue/purple. Each combination comes on its own 250 g spool.
What settings should I start with? The suggested starting range is 200°C–220°C for printing, 0–300 mm/s for speed, and 0°C–60°C for the heated bed. Adjust them to suit your printer and the result you want.
Is it worth it?
For makers who want decorative prints with colour built into the filament, this bundle brings four distinct tricolour palettes together in manageable 250 g spools. Its 1.75 mm format suits compatible FDM printers, while the silk finish and co-extruded colours give display models, ornaments, and custom crafts a distinctive look straight from the print. It’s a practical fit for exploring different colour effects across small projects or changing palettes from one print to the next.
Products with discounts that might interest you
- SUNLU 50 High-Speed Matte PETG 3D Filament, 1.75 mm, Red, 1 kg
- TINMORRY evo 1.75 mm Silk PLA 3D Printer Filament, Light Bronze, 1 kg
- uxcell O-500 Rubber Drive Belt, 500 mm Inner Girth, 10 mm Width
- YXPOLYER PLA PLUS 1.75 mm Yellow PLA+ 3D Printer Filament, 1 kg
- BGTEC Wood Grinding Wheel Set, 100 mm
- Deeplee Matte 2.0 PLA 3D Printer Filament, 1.75 mm, 4 kg, 4 Colours
- ELEGOO PETG 3D Printer Filament, 1.75 mm Black, 4 kg, 4 Spools
- eSUN PLA Filament, 1.75 mm, Cold White, 2 × 1 kg Spools, ±0.03 mm
- GIANTARM M1 Mini 3D Printer with Auto-Levelling and Direct Drive
- HARFINGTON Double Split Shaft Collars, 4-Pack for 8 mm Shafts
- JAYO High Speed Matte PLA 3D Printing Filament, 1.75 mm, 2.2 kg Black
- MECCANIXITY Shaft Collar, 5/8" Bore, Double-Split, Set-Screw, Black
- ANYCUBIC Wash and Cure Station 3.0 Plus
- GIANTARM 700-001-1216 Silk Gold PLA Filament, 1.75 mm, 1 kg
- ELEGOO PETG 1.75 mm Black 1 kg 3D Printer Filament, ±0.02 mm Accuracy
- SUNLU Silk PLA 3D Printer Filament, Light Gold, 1.75 mm, ±0.02 mm, 1 kg
- SUNLU Silk PLA Plus 3D Printer Filament, Dual-Colour Red and Blue, 1.75 mm
- ELEGOO PLA Basic Refill 3D Printer Filament, Black, 1.75 mm, 4 kg
- SUNLU 50 High Speed Matte PETG Filament, 1.75 mm, Black, 2 kg
- eSUN PLA Lite 1.75 mm 3D Printer Filament, Fire Engine Red, 1 kg
- ELEGOO MX-EL-3DF-PB0455 White PLA 3D Printer Filament, 1.75 mm, 4 kg
- SUNLU High Speed PLA Filament, 1.75 mm, 8 Colours, 2 kg
- ELEGOO Matte PLA 3D Printer Filament, Matte White, 4 kg, 1.75 mm
- ELEGOO MX-EL-3DF-PB0502 PLA 3D Printer Filament, 1.75 mm, 4 Colours

