Talentedeco Cabinet Pulls, 5-inch (128 mm) Hole Centres

Replacing mismatched or worn cabinet hardware can be a small job that makes a kitchen or dresser feel more finished. This Talentedeco 10-pack offers brushed satin nickel pulls with a zinc alloy body, so it gives you a consistent handle style across several drawers or cupboard doors. The listed 5-inch (128 mm) hole spacing is the key fit detail for a replacement: matching it to your existing holes can avoid drilling new ones. The measurements are useful, but details about included screws are not provided, so factor that into an installation plan.

Key specifications

The pulls are made from zinc alloy and have a brushed satin nickel finish. Hole centres are 5 inches (128 mm), with an overall length of 6.4 inches (162 mm), a width of 0.3 inches (8 mm) and a projection of 1 inch (27 mm). Each handle is packaged individually to help prevent bumps and scratches while in the box.

The 5-inch hole spacing is especially relevant if you are replacing existing handles. Measure from the centre of one screw hole to the centre of the other, rather than relying on the handle’s overall length. That distinction matters: a pull can look the right size but still fail to line up with the holes already in a drawer front. The description calls the spacing standard, but matching your actual measurements is the more reliable way to judge fit.

Who it’s for

This set suits someone updating several cabinets, drawers, a wardrobe or a dresser with one matching finish. It can also make sense when replacing a group of pulls with the same hole spacing, rather than buying individual handles in different styles. Puede interesarte si you want a straightforward, coordinated look for kitchen cabinets, cupboards, closets or other listed furniture.

Puede no ser la mejor opción si your existing holes do not match the 5-inch (128 mm) centres and you want to avoid drilling, or if you need a specified handle material beyond zinc alloy. Without having tried it, durability in a particular room or under a particular level of daily use cannot be confirmed from the supplied details alone.

Contents

The product is described as a 10-pack of cabinet pulls, with each handle wrapped separately. That makes the set relevant for a small hardware refresh where you want a consistent finish across multiple fronts. For example, you could replace the pulls on a run of kitchen drawers and cupboard doors, checking each set of existing holes before fitting the new handles. The supplied information does not say whether screws are included, so check what you have on hand before starting the job.

Before you decide

Will these fit my existing cabinet holes? They are listed with 5-inch (128 mm) hole centres. Measure between the centres of your current screw holes to compare.

What are the handles made from? The description specifies zinc alloy with a brushed satin nickel finish.

Can they be used outside a kitchen? The listed uses also include closets, cupboards, drawers, dressers, doors and wardrobes, no further installation or environmental details are provided.

Final verdict

Choose this set if you need ten matching pulls, like the brushed satin nickel look and have confirmed the 5-inch (128 mm) hole spacing suits your furniture. It is a less direct fit for a replacement job with different existing holes, and the missing screw information is worth sorting out before installation. If you are choosing hardware for just one spot or need a different spacing, a smaller set or a pull selected to match your measured holes may be the more practical approach.