Goldenwarm Cabinet Handles, Brushed Nickel

These Goldenwarm cabinet handles are aimed at anyone updating kitchen cupboards or giving older furniture a more modern look without replacing the whole piece. The T-bar shape and brushed-nickel finish create a consistent look across a run of drawers, while the 20-pack is suited to a larger refresh rather than a single handle replacement. The key buying decision is fit: the holes are 96 mm apart, so that measurement needs to match your existing cabinet holes if you want to avoid drilling new ones.

Technical details

The pulls are stainless steel with a hollow construction, a brushed-nickel finish and a smooth surface. Each has a T-bar design, with 96 mm (3-3/4 in) between screw holes, an overall length of 150 mm (6 in), a 12 mm diameter and a 32 mm (1-1/4 in) projection from the cabinet surface. The package contains 20 pulls, and each pull comes with two screws in different lengths: 1 in and 1.57 in.

Those dimensions help you judge both fit and feel before ordering. The projection gives your fingers space behind the bar, while the longer overall length makes the pull more prominent than a small, low-profile knob. The handles are hollow, so anyone specifically looking for solid-bar hardware should compare construction as well as appearance.

Getting the most from it

This set makes sense for a coordinated update across multiple drawers or cupboard doors. For example, matching the pulls along a kitchen drawer stack can make older cabinetry feel more considered without changing the cabinet fronts. It is a different approach from replacing knobs one at a time: a set of 20 supports a more uniform finish, but only if the spacing works across the furniture you plan to update.

The brushed-nickel look is intended to add a modern touch, and the T-bar gives you a straightforward horizontal grip. It may suit kitchen cupboards or other furniture with compatible mounting holes, the product details do not specify a particular cabinet style or installation surface beyond cabinets and furniture.

Usage tips

Measure from the centre of one mounting hole to the centre of the other, rather than comparing the handle’s full length. That centre-to-centre distance is 96 mm, the handle itself measures 150 mm overall. Also check the available space around nearby doors and drawers, since the bar projects 32 mm from the surface.

Before fitting, compare the two included screw lengths with the thickness of your cabinet front. The package provides 1 in and 1.57 in screws, but the listing does not give a supported cabinet-thickness range. If neither length suits your furniture, you may need different screws. This may suit you if the existing holes match and you want the same finish across several pieces. It may not suit you if you need a different hole spacing or are choosing hardware for a single small drawer.

Three practical questions

How many handles are included? The pack contains 20 pulls, with two screws supplied for each one.

What size are the mounting holes? The listed hole spacing is 96 mm (3-3/4 in), measured centre to centre. The overall handle length is 150 mm (6 in), which is a separate measurement.

Are the screws all the same length? No. Each pull comes with screws in 1 in and 1.57 in lengths, so select the one that suits the cabinet thickness.

Before buying

This set is worth considering for a multi-drawer refresh when you want matching brushed-nickel T-bar handles and your existing hole spacing is 96 mm. Measure the cabinet fronts first, and check whether the supplied screw lengths suit their thickness. If your holes are spaced differently, these pulls may require new drilling, if you want solid rather than hollow handles, this is not the construction described. The choice comes down less to the finish than to whether the dimensions and hollow design fit your cabinets.