Asidrama cabinet pulls, 3-inch spacing

For anyone updating kitchen cabinets, drawers or a dresser without changing the furniture itself, this Asidrama set offers ten matching pulls in a brushed satin nickel finish. Each handle is made from zinc alloy, with standard 3-inch (76 mm) hole spacing for replacement jobs where the existing holes already match. The shape and finish can also suit a small DIY refresh across several pieces of furniture. Keep in mind that the spacing is fixed, so measure your current holes before choosing these pulls, the listed overall length is 4.4 inches (114 mm).

What to know

The pack contains ten handles. Each measures 0.5 inch (14 mm) wide and projects 1.2 inches (33 mm) from the mounting surface. Those dimensions help you judge how much room the pull may take up and whether it will feel accessible on your cabinet or drawer fronts. The brushed satin nickel finish gives the hardware a subdued metallic look, while the zinc alloy construction distinguishes it from simpler plastic pulls.

For a replacement, the key figure is the 3-inch (76 mm) centre-to-centre spacing, measured between the screw holes—not the pull’s full length. If your existing holes line up, the standard spacing may make the swap more straightforward. If they do not, these handles won’t solve that mismatch by themselves, and the product information does not specify whether mounting screws are included.

How to use it

Use the pulls on kitchen cabinets, cupboards, closets, drawers, dressers, doors or wardrobes, as listed. A practical example: measure the two holes on a drawer front, compare that distance with the 3-inch spacing, then check that the 4.4-inch handle will sit comfortably on the surface. For a multi-drawer dresser, the ten-piece pack lets you use a consistent finish across several fronts, provided the measurements suit each one.

The individual packaging is intended to help prevent bumps and scratches before installation. No cleaning method or care instructions are provided, so avoid assuming that a particular cleaner or maintenance routine is recommended.

Practical tips

Measure the hole centres and the available space on each door or drawer before ordering. Also consider the 1.2-inch projection: it affects how far the handle stands out from the furniture. That can matter on a narrow walkway or where nearby doors and drawers open close together. If you are replacing several different styles, check each location rather than relying on one drawer as a guide.

It’s a good option if you want a coordinated set of ten brushed satin nickel pulls and your furniture has matching 3-inch hole spacing. It may not be the best option if you need another spacing, a different finish or confirmed screw-in-the-box details. The product description also states that quality issues within the 100-day try-out period are covered by replacement or a full refund, the terms themselves are not detailed here.

For your situation

Choose these when the measurements suit the furniture and you want the same finish repeated across cabinets, cupboards or drawers. They offer a more uniform update than replacing only one visible handle, while still keeping the existing furniture in place. If your project calls for new hole positions, a different projection or care guidance for a particular finish, look for a listing that provides those details before deciding.

Three practical questions

How many pulls are included? The product is listed as a pack of ten.

What measurement should I match when replacing a handle? Match the 3-inch (76 mm) distance between the screw-hole centres, the overall length is 4.4 inches (114 mm).

What are they made of? The handles are described as zinc alloy with a brushed satin nickel finish.