Restmo O-HS-1A90-OG 90-Degree Hose Elbow with Shut-Off Valves, 3/4-Inch GHT
Product description
For an outdoor tap with limited clearance, a hose connection that turns away from the ground can make everyday watering easier to manage. The Restmo 90-degree hose elbow redirects the outlet while its shut-off valves let you control water flow at the connection. Its standard 3/4-inch GHT fit is intended for faucets and RV water inlets.
A full-metal body, brass rotating inlet and extended handles bring practical control to garden and RV setups.
Size & fit
The 90-degree outlet is designed for low-mounted spigots and tight spaces, where a straight hose connection can press the hose against the ground. Turning the outlet helps reduce sharp bends and kinks, keeping the hose routed more naturally from the tap. That makes this a useful fit for garden watering, RV water connections and other outdoor setups using a compatible 3/4-inch GHT connection.
The brass inlet rotates 360 degrees to help position the elbow during installation and removal. It can be hand-tightened, with wrench-assisted removal available when needed. The angled design is a different approach from a straight connector: choose it when the direction of the hose matters as much as the tap connection itself.
Why it makes sense
The widened 15 mm inlet and 13 mm ball valve are designed for full-flow water delivery. The product states that this configuration increases flow by over 60% compared with standard models, a useful feature when filling a pool, irrigating or washing outdoors. The 90-degree turn helps avoid the restricted routing that can happen when a hose is forced to bend beside a low tap.
Its one-piece metal body is wrapped in TPR rubber, while the extended all-metal levers have non-slip TPR grips. The larger handles provide leverage for adjusting flow or shutting off water, including when hands are wet or work gloves are on. In a typical garden setup, you can attach the elbow at the spigot, route the hose away from the ground and use the lever controls at the tap rather than reaching along the hose to manage water flow.
Technical overview
- Type: 90-degree hose elbow with shut-off valves
- Compatibility: Standard 3/4-inch GHT faucets and RV water inlets
- Inlet: 15 mm widened inlet, 360-degree rotating brass fitting
- Ball valve: 13 mm
- Body: One-piece metal with TPR rubber wrap
- Handles: Extended metal levers with non-slip TPR grips
- Dimensions: 9.91 x 5.59 x 4.83 cm
- Weight: 272 g
- Colour: Orange
- Pack quantity: 1
- Model: O-HS-1A90-OG
What to clarify
Will it fit a standard garden tap? It uses a 3/4-inch GHT connection and is described for faucets and RV water inlets. Check that your connection uses this thread standard before fitting it.
What does the 90-degree elbow do? It redirects the water outlet, helping keep a hose clear of the ground and reducing tight bends at low-mounted taps or in confined spaces.
Are the controls practical with wet hands? The extended levers have non-slip TPR grips and are designed to make flow adjustment and shut-off easier to handle, even with wet hands or work gloves.
Should you buy it?
Choose the Restmo elbow when you want to redirect a compatible outdoor tap connection, keep a hose route neater and control water at the spigot. Its angled outlet, full-metal body, brass rotating inlet and extended shut-off handles make it particularly suited to garden and RV connections where access and hose positioning matter.