KTNNKG NEWKT-V201 Automatic Remote Vacuum Switch, 220V, 20A, 5s/10s Delay

Choosing a dust-control switch often comes down to convenience or control. This KTNNKG remote vacuum switch lets you operate a compatible dust collector from the included remote rather than reaching for the switch at the unit.

For a straightforward stop, use the ON/OFF button. For a short run-on after a tool stops, select the 5-second or 10-second delay-off setting.

It is designed for dust-collection setups used with woodworking tools, with a maximum dust collector motor rating of 220V, 20A and 3,600W. Match the switch to the collector’s rated requirements before connecting it.

Technical details

• Type: Automatic remote vacuum switch
• Voltage: 220V AC
• Current rating: 20A
• Maximum rated power: 3,600W
• Frequency: 60Hz
• Delay-off settings: 5 seconds and 10 seconds
• Control: Wireless remote
• Material: ABS shell, bronze contacts
• Dimensions: 13 x 5.5 x 4.8 cm
• Weight: 259 g
• Protection rating: IP51
• Model: NEWKT-V201

What it works with

Use the switch with a dust collector serving compatible power tools such as vacuum cleaners, track saws, mitre saws, table saws, power sanders, routers and planers. This makes it useful in a woodworking area where dust collection is part of the routine and the collector’s controls are not always within easy reach.

The delay-off function supports a different workflow from immediate shutoff: after pressing the delay button, the connected tool can continue running for the selected 5 or 10 seconds before the switch shuts off. That short run-on is a practical choice when you want the collection cycle to continue briefly after using a tool. The collector motor must be rated within the switch’s stated maximum of 220V, 20A and 3,600W.

Usage tips

Place the switch where its plug-in connection is accessible, then use the remote’s ON/OFF control for direct operation or choose a delay setting when appropriate. For example, while working at a table saw, you can operate the dust-collection switch remotely and select a brief run-on when finishing a cut, rather than walking over to the collector to shut it down immediately.

The switch is designed to default to OFF after a power failure and restoration, so the connected tool will not start automatically when power returns. If you need to add a remote, the SET button provides a pairing process: hold SET until the green light appears, release it, then hold the new remote’s ON button until the LED blinks.

When it makes sense

This switch suits a workshop setup where remote operation can make dust collection easier to manage around saws, sanders or other listed tools. It offers a simple ON/OFF choice for everyday use, plus two delay-off settings when a brief continued run is useful. If your priority is convenient control without reaching the collector, and its motor rating falls within the stated electrical limits, the KTNNKG provides a focused way to manage dust collection during woodworking tasks.