Portable power station 288Wh

A 288Wh LiFePO4 battery paired with 600W of continuous pure sine wave output gives this portable power station a useful middle ground between a small phone power bank and a larger backup unit. It has two AC outlets, USB ports and a car socket, so a campsite or roadside stop can keep several smaller devices running from one source. Its listed weight is 8.86 lbs, and AC charging takes 1.8 hours to reach 70% from empty. The main trade-off is capacity: it can cover modest needs, but it is not a substitute for a household generator or a high-capacity power station.

Key specifications

The station has 288Wh of capacity, 600W of continuous output and a 1200W peak rating. Its two 110V pure sine wave AC outlets are intended for compatible devices within those limits, the peak figure should not be treated as a continuous rating. The remaining connections are one 100W USB-C PD port, two 18W USB-A ports and a 120W car socket. That mix makes it practical to charge a laptop and phones while using an AC-powered device, rather than relying on a single outlet or carrying several separate adapters.

Charging options include 130W AC wall charging and 80W car charging. The stated AC charge time is 1.8 hours from empty to 70%, not a full recharge. Pass-through charging is supported, so connected devices can draw power while the station recharges. Solar charging is also possible, but the solar panel and solar charging cables are sold separately. The AC outlets automatically shut off when the battery reaches 9% to protect it, DC and USB ports remain available. That behaviour matters if you plan to leave an AC device running unattended.

Who it’s for

This setup makes most sense for camping, RV trips, road travel, small DIY jobs or keeping selected electronics powered during an outage. Picture a laptop, camera batteries and phones charging at a campsite, with a fan connected to AC when needed. At home, it could provide temporary power for lower-demand devices, but 288Wh is a limited reserve and runtime will depend on what you plug in and how much power it draws. A CPAP machine is listed among possible uses, though the product details do not give a runtime estimate, so anyone relying on one overnight should work from the device’s actual power draw rather than assume a full night of backup.

It suits you if you want multiple port types in a unit listed at under 9 lbs and value LiFePO4 cells, which the listing specifies. Without having tested it, the practical buying point is to match your devices’ wattage and expected run time to the station’s ratings. It may not be the best choice if you need to run high-demand appliances for long periods or expect solar charging accessories to come in the box. Compared with a basic power bank, it adds AC outlets, compared with a larger power station, it keeps capacity and weight more modest.

Contents

The box includes the portable power station, an AC charging cable and a user manual. Solar panels, solar charging cables and car charging cables are sold separately, so factor those in if you expect to charge away from a wall outlet. The listing also states a three-year warranty, but does not provide further warranty terms here.

Three practical questions

Can it run a 600W device? The stated continuous output is 600W. Check the device’s rated draw, and allow for its start-up demand, 1200W is the peak rating, not the continuous one.

Is a solar panel included? No. Solar panels and solar charging cables are sold separately.

What happens when the battery gets low? At 9%, AC output shuts off automatically, while the DC and USB ports remain functional.

Veredicto final

Buy it if your priority is a relatively light station for phones, a laptop, cameras and other modest loads, with AC, USB and car charging in one unit. Its port selection and LiFePO4 battery are useful features for trips and limited backup. Choose a larger-capacity model instead if your plan depends on longer runtimes, high-draw appliances or a dependable overnight supply for equipment with no stated runtime estimate.