MOUNTUP MU0010-CA Full-Motion TV Wall Mount for 26–65-Inch TVs

A TV that stays in one viewing position has different mounting needs from a screen shared across a room. The MOUNTUP MU0010-CA full-motion wall mount lets you swivel and tilt a compatible TV, making it easier to adjust the view as seating or room use changes. Its articulating dual-arm design also lets you extend the screen away from the wall or bring it closer when you want a more compact setup.

For a living room, bedroom, kitchen or shared space, this mount offers several ways to position your screen while keeping it wall-mounted.

Key points

The MU0010-CA fits flat and curved TVs from 26 to 65 inches, with a maximum supported weight of 99 lbs and VESA mounting patterns from 100x100 mm to 400x400 mm. That range gives you clear compatibility criteria to check against your TV before choosing a mount. It is designed for installation on wood studs or concrete and brick walls, it is not intended for drywall alone.

Once installed, the bracket swivels up to 45° to the left or right and tilts up 5° or down 10° to help adjust the viewing angle and reduce glare. Its post-install levelling adjustment of 3° allows a small alignment correction, while the arm extends from 2.7 to 14.1 inches from the wall. Two height adjustment positions offer another way to place the screen for the room.

The mount is made from cold-formed steel. For installation, the main bracket is pre-assembled, and the package includes labelled hardware, a mounting template, a bubble level and instructions. M8×45 mm TV screws are available upon request.

Buyer feedback commonly highlights the straightforward installation, adjustable positioning and solid feel. Fit feedback is mixed, so matching the TV’s VESA pattern and weight to the mount’s supported range is a practical step before installation.

Quick sizing guide

Start with the TV’s screen size and weight: it must fall within the 26-to-65-inch range and the 99-lb maximum. Then check the VESA hole pattern on the back of the TV, this mount supports patterns from 100x100 mm through 400x400 mm. These measurements help you assess fit more reliably than screen size alone.

Plan the wall position around the intended viewing area and the available installation surface. The mount is designed for wood studs or concrete and brick, with stud spacing up to 16 inches. A fixed-position setup may suit a screen viewed from one consistent seat, while this articulating mount is suited to rooms where turning, tilting or extending the TV can improve the viewing angle.

Usage tips

Choose the mounting location with the full arm movement in mind, especially if you plan to swivel the TV towards different seating or extend it for access. Use the included template and bubble level to help position the bracket, and install it on an appropriate wood-stud, concrete or brick surface rather than drywall alone. After mounting, use the levelling adjustment to fine-tune the screen’s alignment.

The tilt can help when the screen needs to angle down towards a lower seating position or up to suit the room. Swivel and extension are useful when the main viewing position changes—for example, when a kitchen TV needs to face different parts of the room. Keep the TV within the stated weight, size and VESA ranges when planning the installation.

Buying verdict

The MOUNTUP MU0010-CA is a practical fit for shoppers who want more positioning flexibility than a screen fixed close to the wall can provide. Its swivel, tilt, extension and levelling adjustments support everyday viewing changes, while its defined TV size, weight and VESA ranges make it easier to assess compatibility. For a room shared across multiple viewing positions, the articulating dual arm gives you useful control over where the screen faces.