Lamicall Magnetic Car Charger 15W

For a drive where you rely on your phone for navigation or music, a mount that keeps the screen in view and charges wirelessly can be more practical than a basic holder. The Lamicall magnetic car charger combines a suction-cup mount with adjustable positioning and two USB-C ports.

It’s designed for one-handed phone attachment and removal, which is handy when you’re getting in and out of the car.

Highlights

The mount uses 24 N55 magnets to hold a compatible phone in place, while the suction cup attaches to a clean, flat, smooth surface. Its arm has an aluminium alloy construction and can rotate 360°, tilt 210° and fold 180°. That range gives you room to adjust the screen for a quick glance at directions without settling for a fixed viewing angle.

Charging output is listed as up to 15W for Android, 10W for Samsung and 7.5W for iPhone 12 and later. An intelligent chip adjusts output based on the phone’s battery level and temperature, slowing charging above 80%. Keep in mind that wireless charging can generate heat, and actual charging speed varies by phone and conditions. For iPhone attachment, the product is described for iPhone 12–17 and MagSafe-compatible cases, the listing’s broader model wording shouldn’t be taken as confirmation of compatibility beyond that range.

The two USB-C ports, one at the top and one at the bottom, give you a choice of cable direction. That can make it easier to route a cable away from the gear shift or keep it less visible, depending on where the mount sits.

How to use it

Choose a clean, flat, smooth mounting surface with at least 64 mm of available diameter, such as a suitable area of the dashboard or windshield. Attach the mount, then adjust the arm so the phone is easy to see without obstructing your view of the road. A short trip with the phone in place can help you judge whether the angle and cable route work for your setup before relying on it for regular navigation.

For charging, use a car adapter with a USB-C port rated at PD 18W or higher. The product description doesn’t say whether an adapter is included, so check what comes in the package before you buy. If suction weakens, rinse the cup with water, let it air-dry and reinstall it on a clean surface.

Practical tips

It may suit you if you want a magnetic, adjustable mount and prefer to place or remove your phone with one hand. Compared with a simpler holder that only keeps a device in position, this one adds wireless charging and more angle adjustment, but it also depends on a suitable mounting surface and power adapter. A more basic, non-charging holder may be easier to choose if you don’t need those extras.

It may not be a fit if your preferred mounting spot is textured, uneven or too small for the suction cup, or if your phone and case aren’t compatible with the magnetic attachment. Given its design, the stated charging figures are maximums rather than a promise of the same speed in every car or with every device.

Three specific questions

Does it charge an iPhone? The listing states 7.5W for iPhone 12 and later, and describes magnetic attachment for iPhone 12–17 with MagSafe-compatible cases.

What power adapter should I use? A PD 18W or higher car charger with a USB-C port is recommended for charging. Package contents aren’t specified here.

Can I change the viewing angle? Yes. The arm supports 360° rotation, 210° tilt and 180° folding, so you can adjust its position to suit your dashboard or windshield setup.

For your situation

Choose this Lamicall if your phone is within the stated compatibility range, your car has a suitable smooth mounting surface and you want wireless charging alongside an adjustable magnetic holder. Skip it if the suction cup has nowhere appropriate to attach, or if you’d rather use a basic mount without needing a separate PD car adapter.