Eunice 1/4-Inch (6 mm) ID NBR Fuel Line Hose, 5 FT, Push-Lock
Product description
The oil-resistant NBR rubber construction makes this hose suited to fluid-line jobs where the material needs to handle contact with oil. Its 1/4-inch (6 mm) inside diameter and 5 FT length give you a practical size for automotive line replacement and routing.
The hose is black, with a 0.47-inch (12 mm) outside diameter. It is designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in automotive and other listed applications.
For installation, use hose barbs and fuel-line clamps. Clamps are listed among the included components, so you can plan the connection around the fittings and layout of your system.
How to use it
Measure the required route and match the hose’s inside diameter to the barb fitting. The 1/4-inch (6 mm) ID and 0.47-inch (12 mm) OD help identify the size for the connection and available routing space. Cut and position the hose for the intended run, then secure it with hose barbs and fuel-line clamps.
This 5 FT length can serve a replacement or repair where that size is appropriate. Before installation, check that the hose is suitable for the fluid and pressure in your particular application. Buyer feedback on fuel compatibility is mixed: some report good results as a replacement line, while others raise concerns, especially for gasoline and fuel-injection use. Confirm suitability for the specific fuel and system before putting the hose into service.
Specifications
- Type: Automotive fuel line hose
- Material: NBR rubber
- Colour: Black
- Inside diameter: 1/4 inch (6 mm)
- Outside diameter: 0.47 inches (12 mm)
- Length: 5 FT
- Working pressure: 0.6 Mpa
- Burst pressure: 1.8 Mpa
- Temperature range: -40°F to 248°F
- Included components: Clamps
Why it’s worth it
This hose brings together an oil-resistant NBR construction, a defined inside and outside diameter, and a 5 FT length in one replacement-line format. Those details make it easier to select for a repair or fluid-routing task than a loose length of tubing with no stated dimensions. Its listed applications include gasoline, diesel, biodiesel fuel, engine oil and water, giving it use across several types of automotive fluid lines when the material and pressure rating suit the system.
For a practical repair, identify the hose size at the connection, plan the route, and use the appropriate barb and clamp arrangement. The listed working and burst pressures and temperature range offer useful reference points when matching the hose to that job.
Questions before you buy
What size connections does this hose fit? It has a 1/4-inch (6 mm) inside diameter. Match that measurement to the hose barb, the outside diameter is 0.47 inches (12 mm).
What fluids is it designed to convey? The listed applications are gasoline, diesel, biodiesel fuel, engine oil and water. Buyer feedback on fuel compatibility varies, so check suitability for the exact fluid and system, particularly for gasoline or fuel-injection use.
How is the hose installed? Use hose barbs and fuel-line clamps to secure it. Clamps are listed among the included components.
When it makes sense
Choose this hose for an automotive fluid-line replacement or routing job that calls for a 1/4-inch (6 mm) ID, a 5 FT length and NBR rubber. Its stated dimensions, pressure information and temperature range help you compare it with the requirements of the intended line, while the listed clamps support a straightforward barb-and-clamp connection. It’s a useful format for repairs where those specifications match the vehicle and fluid application.