YNSSJY FFL-018(Female) 13-Inch XLR Screw Terminal Adapter Cables, 4-Pack
Product description
At 13 inches, each YNSSJY FFL-018(Female) cable is a short XLR-to-screw-terminal adapter. The pack includes four cables with female 3-pin XLR connectors. Screw terminals are marked for wiring, and a screwdriver is all that’s needed to secure the connections. The listed use is indoors.
Everyday use
These adapters are intended to carry audio between equipment such as microphones, mixers, and audio interfaces, with the screw-terminal end providing a connection point for a compatible setup. A practical use is adding an XLR connection where the audio equipment or installation uses screw terminals rather than a standard XLR socket. The 13-inch length suits short connections, it is not a long cable run.
The set may be useful for a studio, home audio arrangement, or live-performance setup where a terminal connection is needed. The product is listed for indoor use, so the information provided does not establish outdoor suitability. It makes sense if you need several short adapters and are comfortable wiring screw terminals.
Pros
Four cables are included, which can support more than one connection or leave spares for a setup. The terminals are designed to be secured with screws, so soldering is not required. That makes the connection method different from a conventional prewired XLR cable: these adapters offer terminal wiring, while a ready-made cable is the simpler choice when both ends need standard connectors and no wiring work.
The cable is described as lightweight and has a PVC sheath with a metal XLR plug. These details may matter when choosing a short adapter to handle during equipment setup, but the listing does not give a cable weight or further durability measurements.
What to know
The product has a 3-pin female XLR connector and screw terminals. Its wiring diagram identifies pin 1 as ground, pin 2 as the right channel, and pin 3 as the left channel. Match the connections to the equipment’s requirements before tightening the screws, the product information warns against connecting to the wrong terminals. The diagram is the listed assignment, not confirmation that every device uses the same channel labeling.
Each cable is 13 inches long, and the set contains four. Those fixed details are important when planning placement: the adapters are for short runs, and the listing does not specify an extension length or outdoor use. It may not suit you if the setup calls for a longer cable or a plug-and-play lead without screw-terminal wiring.
Before you decide
Do these cables require soldering? No. The listing describes screw terminals that can be fastened with a screwdriver, so soldering is not required.
How many cables are included? The package is listed as a four-count set, with four adapter cables.
Which pins are identified in the wiring diagram? Pin 1 is ground, pin 2 is right channel, and pin 3 is left channel. Confirm the required connections for your equipment before wiring.
Is it worth it?
This set is worth considering when the specific need is several short, female 3-pin XLR adapters with screw-terminal wiring. The four-count format and solder-free connection method are the main reasons to choose it over a standard prewired cable. If you only need one connection, need a longer run, or require an outdoor-rated product, the information here does not establish that this set meets those needs. For an indoor setup that matches the stated connector and pin arrangement, its purpose is clear, the key decision is whether screw terminals fit the equipment and installation.