TYT Adjustable Trailer Hitch Ball Mount 7500 lbs ๐
Product description
This adjustable trailer hitch ball mount is built to make towing straightforward and adaptable for trucks that use a 2-inch receiver. It integrates an adjustable platform with a 2-inch towing ball and a heavy-duty construction that aims to handle camping, boating, or hauling tasks with less fuss. The design helps you change between a 9-1/2-inch drop and an 8-1/4-inch rise quickly, which is useful when matching trailer height and load balance.
Key Points

The mount fits standard 2-inch receivers and accepts 2-inch hitch balls, so it works with the most common trailer setups. Anti-rattle screws reduce vibration and noise during towing, helping maintain a quieter ride and a firmer connection. Installation is straightforward by sliding the 2" x 2" shank into the receiver and adjusting the platform to the desired height, then securing with the included hardware. There is a 5/8-inch premium pin lock and two pin and clips supplied to keep the assembly in place for regular road use. โ๏ธ


Technical Specifications

- Name: TYT Adjustable Trailer Hitch Ball Mount
- Towing capacity: 7500 lbs
- Ball size: 2 inches
- Adjustable range: - Drop 9-1/2 inches, Rise 8-1/4 inches
- Receiver fit: 2-inch x 2-inch shank
- Pin size: 5/8-inch premium pin lock
Advantages



The heavy-gauge steel construction and powder coat finish increase resistance to wear and weather while on the road. This construction provides a stable connection under load and helps prevent corrosion over time. The adjustable channel simplifies balancing trailer tongue weight when you switch between trailers with different coupler heights. Also, the included premium pin lock adds an extra layer of security beyond standard clip fittings. ๐ง
Usage Recommendations

Before towing, tighten the ball firmly and double-check that all clips, pins, and screws are seated and secure. Consider measuring the trailer and vehicle heights before attaching to select the correct drop or rise for level towing. For quieter towing, recheck the anti-rattle screws periodically as vibration can loosen fittings over time. Note that the stated 7500 lbs rating is according to the manufacturer, and actual safe towing capacity may be limited by your vehicle's hitch class, ball mount rating, and trailer braking system. ๐.
Products with discounts that might interest you
- Orion Motor Tech Adjustable Trailer Hitch (8 in drop/rise) for 2 in receiver, Class 3/4
- NTR 1-1/8" x 30' Kinetic Recovery Tow Rope 37,480 lbs
- TYT Off-Road Winch Rope Kit (1/4 in x 50 ft) Synthetic Cable, 10,000 lb w/ Protective Sheath, Hook, Safety Strap & Stopper (JPS1450IG)
- Adjustable Trailer Truck Drop Hitch 6" Drop 12500 lbs ๐
- OPENROAD 6000 lbs UTV Winch 6000lb
- OPENROAD PP2PL30004 Adjustable Trailer Hitch Ball Mount, 9-1/2-Inch Drop
- Nilight 7-Way Trailer Plug Y Splitter with Double 7Pin Pigtail (Female to Dual Male)
- OPT7 7 Pin to 4 Pin Trailer Adapter 3.75"
- Nilight 2-Inch Rear Trailer Hitch Receiver Kit for 2021-2026 Ford Bronco (2-Door & 4-Door, Excludes Bronco Sport)
- ORCISH AY1-AT Tri-Ball Trailer Hitch Mount with Tow Hook and Lock
- Nilight 2-Inch Shackle Hitch Receiver Recovery Towing Kit (45,000 LBs breaking strength)
- Orion Motor Tech TPA-NA05-AB Trailer Hitch Ball Mount, 2-In Receiver, 6-In Drop
- PAULINN AP9195 RV X-Chock Stabilizers, 2 Sets, 3.5"โ12" Wheel Gaps
- RENO 2"Shackle Hitch Receiver+D-Ring (Black), 2-Inch Towing Mount
- REYSUN 864011L Tri-Ball Hitch with Hook, 2-Inch Receiver, 10,000-lb Max
- RVshark RS1132 Trailer Hitch Coupler Lock for 2-Inch and 2-5/16-Inch Couplers
- TOPTOW 2-1/2" to 2" Trailer Hitch Adapter with Slot Pin Hole
- TYT PP3PL30015 4-Inch Drop Trailer Hitch Ball Mount, 2-Inch Ball
- Nilight 7-Way Trailer Plug 8ft ๐
- 2 Inch Step Hitch Receiver 5000 Lbs
- Nilight 8-Position Adjustable Trailer Hitch Ball Mount for 2-Inch Receivers (5/8-In Pin Lock, 7,500 lbs)
- Nilight Forged Trailer Hitch Ball Mount (2-5/16-Inch Ball) for 2-Inch Receivers, 15000 lbs Capacity, Gloss Black Finish
- Tlvuvmo Adjustable Trailer Hitch for 2 Inch Receiver with Dual-Ball Design
- Nilight 3/4" D-Ring Shackle 9,500 lbs


