Nilight 8-Position Adjustable Trailer Hitch Ball Mount for 2-Inch Receivers (5/8-In Pin Lock, 7,500 lbs)
Product description
What it is (and why people buy it)
An adjustable trailer hitch ball mount is one of those simple towing parts that makes a noticeable difference the first time you try to level a trailer. The Nilight 8-Position design is built around a 2-inch receiver shank and multiple drop/rise settings, so you can fine-tune trailer height without relying on guesswork.
On paper, this model is aimed at heavier towing needs: it’s described with a gross trailer weight (GTW) rating up to 7,500 lbs and a tongue weight (TW) rating up to 750 lbs. It also uses an anti-corrosion finish, which matters because hitch components live in the “wet + road grime” zone.
Key takeaways
You get an 8-position adjustment setup with defined drop and rise options, a 1-inch ball hole, and a 5/8-inch pin hole for securing the mount in your receiver. The finish uses an e-coat pre-coating plus a textured black powder coat, which is meant to help it resist corrosion while staying visually clean.
That adjustability is the main reason this is worth considering. If your trailer rides too high or too low compared to the tow vehicle, being able to change from drop to rise (and switch to a different height) can help you get a more level towing setup. It’s not magic, but it’s a practical way to match real-world trailer setups.
What stands out in everyday use
Installation is described as straightforward: insert the 2-inch shank into your vehicle’s 2-inch hitch receiver, then secure it using the rounded shank and included hitch pin (the listing notes 3pcs 5/8" pin & clip for mounting).
In a typical scenario, you’d back your vehicle under the trailer, adjust to a setting that helps the trailer sit more level, and then re-check before you pull out. With multiple positions (including both drop and rise options), you’re less likely to end up stuck with one compromise height.
One limitation to keep in mind: the listing specifies a 1-inch ball hole and a 5/8-inch pin hole, so this mount only “fits” the right setup if your ball and pin requirements align. If your current ball mount arrangement uses different dimensions, it may not be the drop-in swap you’re hoping for.
Best use cases (and who should buy it)
It makes sense if you tow things like vacation RVs, boats, cars, campers, or ATVs with trailers—especially when you want one hitch ball mount that can handle different trailer heights via adjustment positions.
It also suits buyers who want a corrosion-resistant finish for regular seasonal use. A textured black powder coat (paired with e-coat pre-coating) is a more thoughtful choice than bare metal, particularly if you’re dealing with rain, road salt, or general weather exposure.
You may want to skip it if you already have a fixed-height ball mount that perfectly matches your trailer and you don’t need adjustment. In that case, the extra positioning can be more complexity than benefit.
Tech summary (the specs that matter most)
- GTW (gross trailer weight) up to 7,500 lbs and TW (tongue weight) up to 750 lbs (as listed)
- 2" x 2" shank designed to fit 2-inch receiver setups
- 8-position adjustment with drop options: 5", 6-1/2", 8", 9-1/2" and rise options: 3-3/4", 5-1/4", 6-3/4", 8-1/4"
- 1" ball hole and 5/8" pin hole
- Corrosion resistance: E-coat pre-coating plus high-grade textured black powder coating
- Includes 3pcs 5/8" pin & clip for mounting
Also note the product dimensions are referenced, but the listing mainly emphasizes receiver fit and ball/pin hole sizes—so double-check those against your vehicle receiver and your trailer ball hardware before buying.
Final verdict
Is it worth it? Yes—if you specifically need an adjustable trailer hitch ball mount for a 2-inch receiver and you like the idea of choosing from multiple drop and rise settings to better match your trailer’s height. The combination of stated towing ratings, corrosion-resistant finish, and included 5/8-inch pin/clip parts makes it a practical pick for frequent towing.
Should you buy it? Consider it if you’re tired of trailer stance issues and want one mount that can be tuned. It might not be the best match if your current towing setup depends on different pin/ball hole sizing or if you’re only towing one trailer and already have a perfect fixed-height setup.
Quick FAQ
Is this mount for a 2-inch receiver?
Yes, the listing states the shank is designed as a 2" x 2" setup to fit virtually any industry-standard 2-inch receiver.
What drop and rise options does it offer?
It’s listed with 5", 6-1/2", 8", and 9-1/2" drop, plus 3-3/4", 5-1/4", 6-3/4", and 8-1/4" rise.
What sizes are the ball hole and pin hole?
The ball hole is listed as 1" and the pin hole as 5/8".
Does it include the pin?
The listing says the loaded ball mount comes with 3pcs 5/8" pin & clip.
How easy is installation?
According to the listing, installation is done by inserting the shank into the vehicle’s 2-inch hitch receiver and securing it with the included hitch pin/clip.