TYT PP3PL30015 4-Inch Drop Trailer Hitch Ball Mount, 2-Inch Ball
Product description
For towing with a truck equipped with a standard 2-inch receiver, the TYT PP3PL30015 combines a 4-inch drop with an integrated 2-inch ball. It gives you a ready-to-fit ball mount for trailer setups that need this drop, with a 7,500 lb gross trailer weight capacity and 750 lb tongue weight capacity.
A 5/8-inch hitch pin and clip are included to secure the mount in the receiver.

Quick sizing guide


Start by matching the mount to your vehicle’s receiver: this ball mount is designed for most standardized 2-inch receivers. The 4-inch drop is the key measurement for choosing the right fit between your vehicle and trailer. Compare the hitch height with the trailer’s coupler height so you can select a mount that supports the alignment your setup needs.

The integrated ball is 2 inches, so it is intended for trailers with a coupler sized for a 2-inch ball. Capacity matters too: the mount is rated for up to 7,500 lb GTW and 750 lb TW. Keep the load within the ratings of the mount and the other towing components in your setup. Before towing, tighten the ball securely and check that all connections are firmly in place.
Why it makes sense



This mount brings together the ball and the drawbar in one piece, avoiding a separate ball-mount and ball selection. Its 4-inch drop provides a specific height adjustment for a trailer connection, while the standard 2-inch receiver fit makes it relevant to many truck towing setups. The included pin and clip let you secure the mount without sourcing that receiver hardware separately.
The alloy-steel construction is finished with chrome plating and black powder coating. That dual-finish design adds corrosion resistance for equipment exposed to outdoor conditions. Compared with choosing an adjustable mount for a range of trailer heights, this fixed-drop design is a straightforward choice when a 4-inch drop suits the towing setup. Worth considering if you want an integrated 2-inch ball and a defined drop for a compatible receiver.

Technical overview


- Type: 4-inch drop trailer hitch ball mount
- Receiver fit: Most standardized 2-inch receivers
- Ball: Integrated 2-inch ball
- Capacity: 7,500 lb GTW / 750 lb TW
- Material: Alloy steel
- Finish: Chrome-plated and black powder coated
- Included: 5/8-inch hitch pin and clip

Should you buy it?

Choose this TYT mount when your truck has a compatible 2-inch receiver, your trailer uses a 2-inch coupler, and a 4-inch drop suits the connection height. Its integrated ball, included pin and clip, and stated towing capacities make it a practical match for a setup built around those specifications. It is especially useful when you want a fixed-drop mount rather than an adjustable design, with the hitch components gathered into one ready-to-install assembly.
Products with discounts that might interest you
- TYT PP3PL30026-001 5-in-1 Tri-Ball Hitch Mount for 2-Inch Receiver
- AC-DK PP1PL30044 Trailer Hitch Ball Mount, 2-Inch Drop, 2-5/16-Inch Ball
- TYT PP3PL30050-US Hitch Ball Mount for 2.5-Inch Receivers, 6-Inch Drop/Rise
- Agrieyes TM8006C 7-Way Blade to 4-Way Flat Trailer Adapter, Waterproof
- AUTMATCH MSK001T 3/4-Inch D-Ring Shackles, 7/8-Inch Pins, 2-Pack
- AXSIPEIX AX-DG-TCD-Blue-2"x20ft Boat Winch Strap, 18,000 lb Break Strength
- CAMMOO QH-D01 3-Point Quick Hitch with 2-Inch Receiver, Category 1
- CAMPX Adjustable Trailer Hitch-1, 2-Inch Receiver Hitch, 6-Inch Drop/Rise
- CURT 45340 Trailer Hitch Mount 17000 lbs 🚚
- DAYDOOR SWR-1/4-OR Synthetic Winch Rope, 1/4 in x 50 ft, Orange
- Koerdo Koerdo-2.5R-6D Adjustable Trailer Hitch, 6-Inch Drop/Rise, Dual Balls
- KYX Electric Trailer Jack 5000LBs ⚓
- Lcrslitx LCX-003 50 ft 14-Gauge 7-Way Trailer Wire, 7 Color-Coded Conductors
- LWCH TCB-6-2 Adjustable Trailer Hitch, 6-Inch Drop/Rise, Dual-Ball Mount
- YZONA Tow Hitch 2 Inch for Ford Bronco
- Kingfun Adjustable Trailer Hitch (2-Inch Receiver) with Tri Ball, 6-Inch Drop/Rise, 12,500 LBS GTW Aluminum Tow Hitch
- ORCISH AY1-AT Adjustable Trailer Hitch, 360° Tri-Ball Mount, 5-Inch Drop/Rise
- Orion Motor Tech TPA-NA04-AB Hitch Ball Mount, 2-5/16 in. Ball, Reversible
- Orion Motor Tech Trailer Ball Mount 8000 lb
- Torin ATR39001B 1000 lb Trailer Jack 10" lift 🛻
- TOPTOW ATV/UTV 2-Inch Ball Mount 2000 lb 🚜
- AC-DK PP1PL30008 Trailer Hitch Ball Mount, 2-Inch Ball, 2-Inch Drop
- Tlvuvmo Adjustable Trailer Hitch 6-Inch Drop Hitch Ball Mount (2-Inch Receiver, Dual-Ball 12,500 LBS GTW)
- METOWARE Adjustable Trailer Hitch (Aluminum) for 2-Inch Receiver, 6-Inch Drop/Rise, Dual Ball, 14,000 lbs GTW
