TT TRSMIMA Full-Body Fall Protection Kit with Shock-Absorbing Lanyard and Waist Pad
Product description
With a listed waist range of 30.7–51 inches, this TT TRSMIMA kit is sized for medium-to-large bodies and includes a full-body harness, padded waist support, and a 2m safety lanyard. Its stated use is construction and roofing work, so the sizing and intended job matter more than the broad range of activities mentioned in the product listing.
The waist pad uses ventilated mesh, and four adjustment points allow the harness to be fitted around the body and work clothing.
Fit and sizing
The listed measurements, including buckles, are a waist of 30.7–51 inches, chest of 31.5–47.3 inches, and legs of 19.6–39 inches. The stated fit weight is 130–310 pounds. Those ranges give several points to compare with the wearer’s measurements before purchase, the listing describes the fit as best for medium-to-large bodies. A large adjustment range does not guarantee a secure fit for every body shape, so the harness should be adjusted and checked according to the product instructions before work.
Buyer feedback is not unanimous on fit or comfort: some describe the harness as easy to adjust and secure, while others say it runs large or does not fit as expected. Comfort opinions also vary. Durability feedback is mixed as well, including reports of fraying or loose stitching alongside comments that the harness feels sturdy. These are individual impressions, not a substitute for inspecting safety equipment before use.
Where it shines
This package is aimed at workers who need a full-body harness and lanyard together for roofing or construction tasks. The 2m lanyard is described as shock-absorbing, while the padded, breathable-mesh waist support is intended to make the belt area more comfortable during wear. Side D-rings are listed for work positioning and carrying spare hooks, they are separate from the main fall-arrest role described for the kit.
A practical use case is a roofing job where a worker needs to wear a harness with a lanyard while moving through the work area. The manufacturer states that the harness meets or exceeds ANSI/ASSE Z359.11-2014. That claim should be considered alongside the instructions, equipment condition, and job-specific safety requirements rather than as a guarantee of protection in every setup. The listing says the kit is designed for construction and roofing, not rock climbing or hiking.
Tech specs
- Type: Full-body fall protection harness kit
- Fit: Waist 30.7–51 inches, chest 31.5–47.3 inches, legs 19.6–39 inches
- Stated fit weight: 130–310 pounds
- Adjustment: Four adjustment points
- Included: 2m safety lanyard described as shock-absorbing
- Waist support: Padded, ventilated mesh
- Additional features: Side D-rings for work positioning and spare hooks
- Stated standard: ANSI/ASSE Z359.11-2014
When it makes sense
It makes sense if you need a construction or roofing harness kit with a lanyard included, and the listed fit ranges match the wearer. The padded waist support and adjustment points may also appeal when a basic harness without that waist padding is not the preferred format. The product listing says it is compatible with other types of lanyards, but any substitute must be suitable for the specific harness and work setup.
It may not suit you if you need equipment for rock climbing or hiking, which the listing excludes, or if the measurements do not allow a secure fit. Before relying on the kit for fall protection, follow its instructions and applicable workplace procedures, and inspect it for wear or damage.