3DHoJor PLA+ 3D Printer Filament 1.75mm

A filament that tangles, feeds unevenly, or needs more toughness than standard PLA can make a simple print feel like a troubleshooting job. 3DHoJor PLA+ is aimed at smoother FDM printing, with a 1.75 mm format, a soft pink color, and a cardboard spool. The listing describes it as tougher and stronger than regular PLA, though print results still depend on your printer settings and the model. If you want a distinctive color for decorative parts or prototypes, this spool gives you a straightforward way to add it without switching to a more demanding material.

Size & fit

This is 1.75 mm PLA+ filament, with stated dimensional accuracy of ±0.03 mm. The manufacturer lists compatibility with most FDM printers and names examples including Bambu Lab, AnkerMake, Voron, Raise3D, Prusa, and Creality Ender models. That is useful as a starting point, not a guarantee for every printer or feed setup, check your machine’s required filament diameter before choosing. The spool is cardboard, and the listing says its wrapped construction and stiffer edges are intended to roll better in AMS systems.

For a practical use, imagine printing a soft-pink nameplate or a small decorative piece for a desk: the color is built into the filament, so there is no need to paint the printed surface just to get that look. The supplied guidance gives a nozzle range of 210°C–230°C, recommends 215°C, and lists a bed range of 45°C–60°C. Do those settings match the range you normally use? They offer a starting point, but your printer and print may need adjustments.

Pros

The main appeal is the combination of PLA-style use and the listing’s stated boost in strength and toughness over standard PLA. Low shrinkage and strong layer adhesion are also claimed, which may help when you want a stable-looking print rather than a spool chosen only for color. The filament is mechanically wound and manually checked to reduce tangling, and the sealed bag includes desiccant to help keep moisture and dust away before use.

Worth considering if you want soft pink PLA+ for everyday FDM projects and value the convenience of a cardboard spool. It’s not for you if your printer requires a different filament diameter, or if you need a material with specifications beyond the PLA+ properties listed here. The spool and filament are described as low-odor, and the material as derived from purified corn grain, those descriptions do not establish suitability for every use.

Spec sheet

• Name: 3DHoJor PLA+ 3D printer filament
• Type: PLA+
• Format: 1.75 mm filament
• Capacity: 1KG
• Color: Soft pink
• Dimensions: ±0.03 mm stated dimensional accuracy
• Material: PLA+, cardboard spool

Buying verdict

This spool makes sense if your printer uses 1.75 mm filament and you want a soft-pink option with a cardboard spool and a stated focus on toughness and dependable feeding. From the way it is set up, it is geared toward familiar FDM workflows rather than a specialist material or a major change to your printing process. Compared with choosing basic PLA solely for a standard color, the reason to pick this one is the pink finish and claimed PLA+ toughness, if color and those added properties do not matter, the product details give little reason to choose it over a simpler filament. Check the diameter and temperature guidance against your printer before buying, especially if your setup has specific spool or feeding requirements.