Tech Drive bathroom exhaust fan, 150 CFM

If you want a bathroom fan that also handles the main light, this unit combines ventilation with a dimmable LED and a separate night-light mode. If your priority is simply replacing a fan, the added lighting controls may matter less than whether the housing and ceiling opening fit your space.

Its listed airflow is 150 CFM, with a 6-inch duct and a 1,000-lumen light. The setup is designed for bathrooms up to 155 sq. ft., so the room size is an important part of the decision.

What matters most

The useful distinction here is that this is more than a basic exhaust fan: it combines moisture ventilation, a main light with five selectable color temperatures, and a night light. The color temperature is changed with a toggle on the back of the grille, dimming the white light requires a dimmer switch. To activate night-light mode, the instructions say to toggle the wall switch off and on within three seconds.

The fan is rated at 1.5 sones, and its 150 CFM airflow is specified for bathrooms up to 155 sq. ft. That gives you a concrete sizing reference, but it does not establish how well it will clear moisture in every room or installation. Keep in mind that the ceiling opening is 9.5 by 9.5 inches, while the housing measures 9.2 by 9.2 by 6.6 inches, without that measurement, fit in an existing opening is uncertain. Its galvanized steel housing is described as corrosion-resistant, and the product is ETL certified.

Best use cases

This makes the most sense when you are updating a bathroom and want ventilation and a built-in light in one ceiling fixture. Picture turning on the fan and choosing a warmer or cooler light for a nighttime bathroom visit, then using the low-light mode instead of the brighter main lamp. It suits you if those combined functions are more useful than a simple fan-only replacement.

For new construction, the housing can attach to ceiling joists when spacing is under 12 inches, suspension brackets are specified for spacing from 16 to 24 inches. For existing construction, the product is designed for room-side installation without attic access and is said to replace most existing bathroom fans. A separate fan and light may suit a project where you want to choose those components independently, while this all-in-one approach prioritizes a single ceiling fixture. Not the best choice if your bathroom is larger than the listed 155 sq. ft. or the opening and duct setup do not match the stated dimensions.

Tips for day-to-day use

Choose the light color temperature using the grille’s rear toggle before settling on the final setup, since the control is not described as an everyday wall adjustment. If you want dimming, plan on using a dimmer switch. The quick wall-switch sequence for night-light mode is another control detail worth knowing before installation.

The fan can be installed over a bathtub or shower only when connected to a GFCI-protected branch circuit. The listing gives a minimum operating life of 25,000 hours, but does not provide details here on a warranty or the dimmer-switch requirements. Check those installation needs against your existing wiring and ceiling before choosing it.

Before you decide

Can the light color be changed? Yes. It offers five color temperatures, selected with a toggle on the back of the grille.

Does dimming work with any switch? The listing specifies a dimmer switch for adjusting the brightness of the white light, but does not identify a particular dimmer model.

Can it go above a shower? The product is listed for use over a bathtub or shower when installed on a GFCI-protected branch circuit.

Buying verdict

Choose this fan if the 150 CFM rating suits your bathroom, the stated opening and 6-inch duct work for your ceiling, and you want the light and night-light functions in the same fixture. Pass if you only need basic ventilation, want to select a separate light, or cannot confirm that the listed dimensions and electrical requirements fit your installation.