Tapsi TA6A Dash Cam Adhesive Replacement Pads, 4-Pack Acrylic Foam
Product description
Spec sheet
The double-sided acrylic foam pads give dash cam and accessory mounts a replacement adhesive surface, helping you keep a mount in place without replacing the entire setup. Heat resistance up to 149°C makes them suited to automotive environments, while the included adhesion promoter supports bonding on the mount base.
The pack includes two square pads and two rectangular pads, so you can match the adhesive area to different mount bases. Each pad can also be trimmed to fit.
- Type: Double-sided acrylic foam adhesive pads
- Quantity: Four pads and four adhesion promoter wipes
- Pad sizes: 2.83" × 2.83" and 2.83" × 1.42"
- Thickness: 0.063" (1.6 mm)
- Surface recommendations: Windshield and dashboard
- Compatible materials: Glass, metal, and plastic
- Temperature resistance: Up to 149°C
What it works with
These replacement pads are intended for dash cam, GPS, and phone-holder mounts on flat glass, metal, or plastic surfaces. They offer a practical alternative to replacing a complete mount when the existing adhesive pad needs to be changed. The two shapes provide options for different base sizes, and trimming lets you adapt a pad to the mount’s outline. They are not intended for rear-view mirrors.
For a dash cam installation, choose the square or rectangular pad that best matches the mount base, then place it on a clean, suitable surface. The acrylic foam core is also water resistant, a useful feature for an accessory mounted in a vehicle cabin.
Getting the most from it
Clean the mounting area with alcohol and let it dry. Apply an adhesion promoter wipe to the mount base—not to the windshield or dashboard—and allow it to dry before attaching the pad. Press firmly for 30 seconds, then wait at least 24 hours before mounting the device so the adhesive has time to develop its bond. For a neat fit, trim the pad to the base shape before installation.
Buyers describe the pads as easy to apply and suitable for different surfaces, while feedback on adhesive strength and heat resistance is mixed. A careful fit and the recommended preparation steps help make the most of the pads’ adhesive design.
Questions before you buy
Can I trim the pads to fit my mount? Yes. The pads can be cut to match the shape of the mount base, making it easier to cover the intended contact area.
How should I apply the adhesion promoter? Use it on the mount base, not on the windshield or dashboard. Clean the surfaces first, let them dry, and allow at least 24 hours after attaching the pad before mounting the device.
Can I reuse a pad after removing it? No. The adhesive is designed for one-time use, so use a fresh pad for a replacement installation.
When it makes sense
The Tapsi TA6A is a focused replacement for drivers who want to keep using a compatible dash cam, GPS, or phone-holder mount and refresh its adhesive attachment. Its two pad shapes, trimmable format, and included promoter wipes make it useful for fitting different mount bases while following a straightforward installation process.