Nilight 10313W Off-Road LED Light Bar Wiring Harness, 12V, 5-Pin Switch
Product description
Tech specs
- Model: 10313W
- Voltage: 12V DC
- Wire: 16 AWG stranded, 10 ft
- Maximum load: 180W, maximum current: 15A
- Light outputs: 2 leads
- Switch: 5-pin rocker switch with SPST on/off control
- Protection: Power relay and inline blade fuse
- Harness material: Nylon
- Water resistance rating: IP67

What it works with


Use this harness with 12V battery vehicles, including cars, trucks, Jeeps, campers, RVs, ATVs, UTVs, motorcycles, boats, yachts, and trailers. Its two light-output connectors are intended for a pair of lighting fixtures with a combined load below 180W. That makes it useful when one switch needs to control two lights, for a single-fixture setup, one output lead can serve the installation.

The 16 AWG wiring, relay, and inline blade fuse provide a dedicated path for controlling auxiliary lighting. The relay lets the switch control the lighting circuit, while the fuse is designed to interrupt the connection if current exceeds its rating. The nylon jacket adds flexibility and wear resistance for vehicle wiring, and the IP67 rating is a practical detail for off-road and marine environments.
How to use it



Connect the harness to a 12V DC power source and route its two output leads to the lighting fixtures. Use the 5-pin rocker switch to turn the lights on or off. Its built-in LEDs illuminate the switch markings, making the on/off control easier to locate in the dark. The relay and inline fuse are part of the harness circuit, so the switch can operate the lights through the relay rather than carrying the full lighting current itself.
Plan the cable route and switch position around the vehicle or equipment before installation. The kit includes the wiring harness, instructions, blade fuses, and spade connectors. For a secure installation, follow the instructions and have a professional complete the wiring or guide the installation. This is a wiring and control solution for adding auxiliary lights, not a light bar itself.

What to clarify


What do the relay and blade fuse do? The relay uses the switch circuit to control the lighting circuit. The inline blade fuse is intended to break the connection if current exceeds the fuse rating, helping protect the connected electrical circuit.

Can the two output leads run a pair of lights? Yes. The two sets of light-output connectors are designed for dual lighting fixtures with a combined load below 180W. The harness is rated for a maximum load of 180W and 15A.
What comes with the harness? The kit includes one wiring harness, instructions, blade fuses, and spade connectors. The 5-pin rocker switch is part of the harness setup.

Final verdict
For drivers and equipment owners adding auxiliary lighting to a 12V vehicle, the Nilight 10313W brings the switch, relay, fuse, and two light-output leads together in one wiring kit. Its dual outputs suit a paired-light setup, while the illuminated rocker switch gives you a straightforward way to control the lights from the chosen switch location.
Products with discounts that might interest you
- Nilight 10070W 12V Rocker Switch Wiring Harness, 4 Leads, 16 AWG
- LOSSIGY GC48105 48V 105Ah LiFePO4 Golf Cart Battery with 200A BMS
- Nilight 50393RV 50A RV Plug Set, NEMA 14-50P/14-50R, ETL Listed
- MEYULMOL 48100-250L-BT 48V 100Ah LiFePO4 Golf Cart Battery Kit
- Nilight 50003R 5-Pin Automotive Relay Set, 12V SPDT, 30/40A, 5-Pack
- MILLIONHOME DF-02 50-Amp RV Surge Protector, 18,000 J, Waterproof
- Nilight 90108A 1-2-Both-Off Battery Disconnect Switch, 200A, 12–48V DC
- Mosurr galaxy Wireless Car Charger Mount, 15W Qi, Auto-Clamping, Pink
- Nilight 50437RV 30 Amp RV Replacement Plug, NEMA TT-30P with Handle
- MRGLAS K97 90W Car Charger with USB-C PD45W, USB-A QC45W and Cable
- Nilight 10019W LED Light Bar Wiring Harness, 12AWG, 12V, Relay and Fuse
- NEXPEAK NC101 12V 6A Smart Lead-Acid Battery Charger with LCD
- NOONE Jumper Cables 10 ft, 10-Gauge for Cars
- OGRPHY LAF48100 48V 100Ah LiFePO4 Golf Cart Battery Kit with Charger
- PlugSaf 50 Amp RV Surge Protector, 22,000J, LED Analyzer and Auto Shutoff
- PLXX BC-603 12V/24V Battery Charger, 0–15A Smart Charging and Repair
- Heavy Duty 0 Gauge 30ft 1000AMP Jumper Cables
- 0AWG x 30Ft Heavy Duty Jumper Cables 1000A
- TOPDC TD-BT A8(4x2) 8-Way Battery Terminal Connectors, 2/0 AWG Ports
- SUNER POWER BC-20W-PB Ultra 20W Solar Battery Charger with MPPT
- Paodekua Solar Battery Charger 35W
- LENZ J1772 Adapter 80A for Tesla
- dumfume 12.8V 100AH Group 31 LiFePO4 Battery, 100A BMS, 1280Wh
- XGMATT Starlink Pipe Adapter, Manganese Steel

