Mounting Dream MD2380 32–65 Inch TV Mount
Reviews
Price
Product description
This full motion TV wall mount brings flexible positioning to living rooms and home theaters, supporting flat screens from 32 to 65 inches and reducing glare for better viewing angles. If you need a sturdy bracket that swivels, tilts and extends for varied seating arrangements, this mount offers a practical mix of reach and stability for everyday TV use.
Key Points

The bracket features articulating dual arms that extend the display outward and retract it back toward the wall, so you can move the TV up to 15.8 inches from the wall and return it to 3.6 inches when not in use. This motion range helps when mounting above a fireplace or on a side wall where different viewing positions matter. The mount allows left and right swivel and a tilt of 15° up and 5° down to cut reflections and fine tune the sightline. 😊


Installation includes clearly labeled hardware packs and a bubble level to help align the screen. According to the manufacturer, components are robot-welded for strength and the assembly is load tested to a multiple of the rated capacity. Consider that the mount is made for 16 inch studs; if your studs are spaced differently, additional hardware may be required. ⚙️

Technical Specifications
- Name: Mounting Dream MD2380
- Compatible screen size: 32–65 inches
- Maximum load: 99 lbs
- Max VESA pattern: 400 x 400 mm
- Extension range: 3.6 to 15.8 inches



Usage Recommendations
For best results, center the mounting plate on two properly spaced 16 inch studs and use the supplied lag bolts for a secure fit. When positioning the TV height, factor in both the viewing angle and the swivel needed for other seating areas. Cable management can be easier when the arms are retracted, so route cords before final adjustment. If you plan to mount a very thin or unusually shaped TV, verify that the VESA pattern listed by the TV matches the mount’s maximum pattern.

Advantages
This bracket offers a balance of rigidity and mobility, making it suitable for rooms where viewers may sit to the side or where the screen must clear a mantel. The articulating dual arms are useful when you want to pull the TV into a more central position for game nights or push it back for a sleeker look. The unit’s rated 99 lbs capacity and tested construction give extra confidence when mounting heavier panels, and the included leveling tools simplify alignment. 📺
Products with discounts that might interest you
- Barcetine 01 White Flag Pole Kit, 5–6 ft, Rotating Rings, 2-Position Bracket
- Wuyocha Light Switch Wall Plate 1-Gang
- Bathroom Hardware Set with 23.6-Inch Towel Bars
- USX Mount Full Motion 42-84" TV Mount
- Kohree 8000 lbs Trailer Jack Heavy Duty — Bolt-On, 20-24V Electric Drill-Operated with Drop Leg and Handle
- ABUSA Heavy Duty Swing Hangers 5000 lb 🪢
- Pipishell Tilt TV Wall Mount for 37–85" TVs
- HOOPLE White Flag Pole-1 6 ft Aluminum Spinning Flagpole with Rotating Rings
- Tckasdj Starlink Gen 3 Mount: 360° Adjustable, Telescoping, Heavy-Duty Wall/Pole Mount
- USX MOUNT TV Wall Mount for 42-84" TVs 110 lbs
- Starlink Mount Gen 3 with Pipe Adapter: Long Heavy Duty Mounting Kit for Wall or Roof
- MONOID Wall Corner Protector, 47.24-Inch Length
- MaKefeile Curtain Track 9ft-12ft
- Yamxbfa Triple Toggle Switch Plate Polycarbonate
- YesBes 116in Cord Hider Kit
- JANNIRESS Labor-Saving Jack with 6.69-Inch Lift
- ELIVED TV Wall Mount 26–60 inch swivel and tilt
- Cerpourt 22725 Picture Hanging Wire, 100 ft Braided Steel, 30 lb Capacity
- CHUNNIAO 1'' 160Mil 36PCS Paired Adhesive Magnets, 1-Inch Squares
- DIYMAG Magnetic Hooks, 12-Pack, Black Neodymium Hooks, 85 lb Vertical Capacity
- Dopro 2xK1658-Dopro M3x8mm Black Guitar Saddle Height Screws, 100-Pack
- ELEAD E70090 Heavy-Duty Bungee Cords, 20-Piece Rubber Set with Hooks
- ENJOYBASICS CREB0037AMUS Double Curtain Rod, Adjustable 28–48 in, Black
- ENYZTBI 4 inch x 12 packs Kickdown Door Stops, Adjustable Aluminum with Rubber Tips



