ELIVED TV Wall Mount 26–60 inch swivel and tilt 📺

This full-motion TV wall mount brings flexible viewing to living rooms, bedrooms, and media rooms by allowing tilt, swivel, and leveling adjustments for reduced glare and wider sightlines. It is ideal for TVs between 26 and 55 inches and helps position screens closer or farther from the wall depending on your seating and room layout.

Key Points

The mount offers tilt from +5° to -10° and up to 180° swivel so you can change viewing angle without moving the TV. Level adjustment of +/-3° helps correct small alignment issues after installation. The articulated arm extends the display up to 19 inches from the wall and retracts to a low profile of about 2.7 inches, giving both a slim look when tucked away and reach when you need it. 😊

Materials focus on durability, with a cold-rolled steel construction and reinforced arms that, according to the manufacturer, deliver stability nearly four times that of some competing mounts. A single-center bolt design simplifies the pivot point and makes adjustments smoother. Installation is intended to be straightforward with the included mounting hardware and step-by-step instructions for a setup that the brand indicates can take about 10 minutes. 🔧

Consider that this mount supports TVs weighing less than 88 pounds and VESA patterns from 100 x 100 mm up to 400 x 400 mm. Check your TV’s VESA pattern and weight before installation and verify the wall type where it will be attached, as wood studs or concrete are recommended for secure mounting. According to the manufacturer, a 10-year support is available for the product, which may provide extra peace of mind for longer term use. 📌

Technical Specifications

• Name: ELIVED TV Wall Mount for 26-55 inch TVs
• Tilt range: +5° / -10°
• Swivel range: 180°
• Level adjustment: +/-3°
• Extension from wall: - extends 19 inches / retracts to 2.7 inches
• Maximum supported weight: 88 lb
• VESA compatibility: 100 x 100 mm to 400 x 400 mm

Usage Recommendations

For best results, mount the bracket on a solid surface such as a load-bearing stud or concrete wall, and use the appropriate anchors for the wall type. When positioning the TV, start with the arm retracted to find the ideal height, then extend and swivel to test sightlines from different seating areas. If the TV will be viewed from wide angles, tilt slightly downward to reduce reflections and improve contrast. Also, route cables before finalizing the mount position to avoid strain on connectors when the arm is moved.