Monoprice 104061 RG6 Quad Shield CL2 Coaxial Cable with F Type Connector, 50ft (White)

If you’re upgrading coax runs for TV, cable, or networking-style connections, the Monoprice 104061 RG6 Quad Shield cable is built around one idea: keep the signal path cleaner. Over a longer run, coax performance often comes down to shielding and cable construction, not just the connector.

This is a 50ft RG6 coax cable with a quad-shielded design and F type connectors. It’s also rated as CL2, which can matter for how it can be routed in a typical home installation setup.

What to know before you buy

RG6 is a common go-to for many residential coax needs because it’s widely used for cable TV and similar signal setups. Monoprice positions this model as a heavy-duty, quad-shielded RG-6 cable (with an 18AWG conductor) aimed at maximizing signal transfer while minimizing interference.

On paper, that’s exactly what you want if your current line has issues like pixelation, intermittent dropouts, or inconsistent performance—especially when the cable run is longer or routed near potential sources of noise.

Still, there’s a limitation to keep in mind: shielding helps, but it can’t fix every problem. If your splitters, wall outlets, grounding, or the equipment on either end are the real weak link, swapping coax may not magically solve everything.

The essentials (and what you’ll notice)

The biggest differentiator here is the quad shielding. In practical terms, more shielding is meant to reduce the impact of interference coming from outside the cable. The result you’re aiming for is steadier signal transfer and fewer disruptions.

It’s rated at 75 ohms and listed at 2200 MHz. If you’re matching coax components (splitters, wall plates, connectors) that expect 75 ohm RG6, this kind of spec alignment is typically what keeps setups working smoothly.

There’s also the connector detail: it includes F type connectors. That’s a big deal when you don’t want to fuss with compatibility or connector fit during a time-sensitive install.

Key features that drive value

This cable is positioned as a rugged, quality-controlled option “at a fair price,” and that’s not a claim you should ignore—especially if you’re buying just one run and want it to hold up.

What stands out from the description: - Quad shielded RG6 construction designed to minimize interference - 75 ohm impedance and 2200 MHz rating for signal transfer - Heavy-duty RG-6/UL 18AWG construction (useful if you want something sturdier than the thinnest, cheapest coax) - F type connector included for easier matching - CL2 rating, which can be relevant for certain routing/install scenarios

One more buying reassurance: Monoprice includes a lifetime warranty on cables, and they mention a support team available before and after purchase. That matters if you’re making an install you don’t want to revisit.

Where it shines vs. basic coax

A basic coax cable can work, but it may be more sensitive to interference and handling. This one is clearly aimed at “get the signal there cleanly” installs—like when you’re pulling a new line in the home, replacing a damaged section, or rewiring around areas where noise is more likely.

If you’re just doing a very short, simple run with no real noise concerns, you may not need this level of shielding. But if your setup depends on consistent performance, this is the kind of upgrade that’s more likely to pay off.

It might not be the best match if you’re trying to solve an equipment mismatch (for example, incompatible outlets or a poorly matched distribution setup). In those cases, coax quality won’t outweigh the rest of the chain.

Practical tips for installing a 50ft coax run

Routing coax is usually less about “powering through” and more about getting the cable path right.

• Plan your route first so you’re not stretching the cable under tension. Coax that’s strained during install can lead to long-term connection headaches.
• Keep sharp bends to a minimum. Where cables transition through corners or door frames, small routing tweaks can prevent stress at the connectors.
• Since this comes with F type connectors, double-check the fit at both ends before finalizing the wall plate or connection.

Micro-scenario: say you’re running a 50ft line from a wall outlet to a living room TV. If your current cable is old and you’re also dealing with intermittent signal quality when the room’s electronics kick on, swapping to a quad-shielded RG6 run is a reasonable first move—especially because it targets interference, not just general “cable replacement.”

Tech specs

• Name: Monoprice 104061 RG6 Quad Shield CL2 Coaxial Cable with F Type Connector
• Type: RG6 coaxial cable
• Capacity: 75 ohm
• Frequency rating: 2200 MHz
• Material: UL 18AWG (as listed)
• Color: White
• Length: 50ft

Is it worth it?

Buy the Monoprice 104061 RG6 Quad Shield CL2 coax cable if you want a sturdier RG6 run designed to reduce interference, and you need a 50ft cable with F type connectors already handled for you. The combination of 75 ohm, 2200 MHz, and quad shielding is aimed at cleaner signal transfer, which is the kind of improvement you actually feel in day-to-day viewing when setups are sensitive to noise.

Skip it (or at least think twice) if you’re not sure the coax is the real bottleneck—because poor connectors, splitters, wall outlets, grounding issues, or equipment compatibility problems won’t be fixed by better cable alone. And if your install is very short and extremely straightforward, this may be more shielding and cable than you truly need.

If you’re an installer, hobbyist, or homeowner doing a careful home upgrade where signal consistency matters, this fits that “do it right once” mindset—especially with Monoprice’s lifetime warranty on cables and their support team mentioned for pre- and post-purchase questions.

Mini FAQ

How do I know this cable matches my coax system?

The key detail is that it’s RG6 with 75 ohm impedance and 2200 MHz rating as listed. If your existing coax components are meant for 75 ohm RG6, it’s more likely to be a clean match.

Does the quad shielding help with interference?

That’s the intent. Quad shielding is designed to minimize interference, which is often a contributor to signal instability on coax runs.

What does “CL2” matter for?

CL2 rating can be relevant for certain installation/routing scenarios. If you have a specific routing plan, it’s worth confirming it aligns with your local installation requirements.

Why choose F type connectors included?

Included F type connectors can make the install faster and reduce the risk of connector fit problems.

Is 50ft the right length?

50ft is the listed length, so it’s best when your run is close to that. Buying longer than you need can create extra cable slack that you still have to route carefully.