LuccLinc Balanced XLR-to-TRS Audio Cable, 10 ft
Product description
A microphone cable that ends in the wrong connector can bring a setup to a halt, especially when you’re trying to connect an XLR mic to gear with a 1/4-inch input. This LuccLinc cable provides a female XLR connection on one end and a 1/4-inch TRS plug on the other, with a 10 ft run for stage or studio setups.
Its balanced wiring is intended for compatible equipment, not every 1/4-inch jack.
Key specifications
The cable is 10 ft (3 m) long and uses a three-pin female XLR connector and a 1/4-inch TRS connector. Its stated wiring is Pin 2 to Tip, Pin 3 to Ring, and Pin 1 to Sleeve. That arrangement carries a balanced signal when the connected devices also support balanced audio, the cable alone cannot make an unbalanced input balanced.
A nylon braid covers the cable, and the connectors have zinc-alloy housings. These construction details suit regular handling better than a bare, easily snagged lead, though the listing doesn’t provide a cable gauge or a specific durability rating. For a setup where gauge matters, you’d be choosing without that measurement.
Who it’s for
This is aimed at connecting a microphone with an XLR output to a mixer, stage box, or other device with a compatible balanced TRS input. It can also serve a signal path to powered speakers or studio monitors when their input and the rest of the setup support the connection. For example, you could route an XLR mic from a performance area to a nearby mixer without laying out a longer cable than the listed 10 ft.
It suits you if you need this particular XLR-to-TRS format, want some room to move around a stage or studio, and value a braided jacket for frequent handling. It might not be a great match if your equipment needs XLR on both ends, a 1/4-inch TS plug, or a longer run. Check the receiving device’s input type and balanced-audio support before choosing, connector shape alone doesn’t confirm the signal path will work as intended.
What’s included
The listing specifies the audio cable and hook-and-loop cable ties. Those ties can help keep a lead gathered between sessions or make it easier to manage a small group of cables on a stage floor. They’re a practical extra for storage and organization, but they don’t replace checking each cable’s route and connection when troubleshooting a busy setup.
Practical doubts
Is this cable balanced? The listed Pin 2-to-Tip, Pin 3-to-Ring, and Pin 1-to-Sleeve wiring is for a balanced connection. Both connected devices need compatible balanced connections for that arrangement to provide its intended benefit.
Can I use it with any XLR microphone? The cable has a female XLR end, but the other device must accept a 1/4-inch TRS connection. The listing specifically describes use with dynamic microphones, it doesn’t provide details about phantom power or other microphone requirements.
Are cable ties included? Yes. The product description lists hook-and-loop ties for gathering or organizing the cable.
Final verdict
Choose this LuccLinc cable when your setup calls for a female XLR-to-TRS lead, the 10 ft length suits the distance, and the receiving input supports balanced TRS. The braided exterior and included ties are useful for a cable that gets packed, placed, and moved regularly. Skip it for a connection that needs different plugs, or when you need confirmed details about gauge, phantom-power support, or a longer cable run, those specifics aren’t provided.