JOLGOO jg-adpt-xlr-2023102801 12-Inch DMX XLR Adapter, 5-Pin to 3-Pin, 2-Pack

When a lighting setup uses different DMX connector styles, the right adapter can bridge the connection without replacing the fixtures or control gear. The JOLGOO 12-inch cable converts between a 5-pin XLR male connection and a 3-pin XLR female connection, making it useful for linking compatible DMX equipment across a mixed setup.

Each two-pack adapter uses pass-through wiring for pins 1, 2, and 3, pins 4 and 5 are not used. Its braided nylon jacket, gold-plated contacts, and molded strain relief support practical use in studio and live-stage setups.

Why it’s worth it

Rather than changing out equipment simply because the DMX connectors differ, use this compact adapter to connect a 5-pin side to a 3-pin side. For example, it can link a 5-pin DMX output to a fixture with a 3-pin input when the mating connectors match. The 12-inch cable keeps the connection short, while the pack of two gives you another adapter for a second connection or as a spare in your lighting case.

The braided jacket is designed to resist tangling and protect against cuts and damage from twisting or kinking. Gold-plated contacts and molded strain relief add practical reinforcement at the connection points—helpful when equipment is regularly set up and packed away. Need to connect gear with different DMX pin counts without adding a long cable run? This adapter is built for that specific conversion.

Highlights

The connector arrangement is 5-pin XLR male to 3-pin XLR female. Wiring passes pins 1, 2, and 3 directly through to the 3-pin side, pins 4 and 5 are unused in the conversion. This makes the cable suitable for compatible DMX lighting connections where those three pins carry the required signal path. Match the connector ends to the corresponding jacks and plugs on your equipment before connecting.

The adapters are 12 inches long and have a braided nylon exterior. Their compact format fits naturally into a lighting case and works for indoor or outdoor setups. The two-piece pack is useful when a rig has more than one mixed-connector connection to make, or when keeping a spare on hand is convenient.

Who it’s for

This set is intended for lighting technicians, stage crews, and studio users connecting compatible DMX devices with 5-pin and 3-pin XLR connectors. It is a focused choice for a mixed-connector lighting rig rather than a general-purpose audio cable. Microphones and mixers that use 3-pin XLR at both ends call for a standard 3-pin XLR cable instead of this 5-to-3-pin adapter.

Questions before you buy

What does the adapter connect? It has a 5-pin XLR male end and a 3-pin XLR female end. Use it where the equipment has matching 5-pin female and 3-pin male connections, respectively.

How are the pins wired? Pins 1, 2, and 3 pass through directly to the 3-pin side. Pins 4 and 5 are not used, so the adapter is intended for compatible DMX conversion between these connector types.

What comes in the pack? The set contains two 12-inch adapters, giving you a pair for multiple connections or one to keep as a spare.

Buying verdict

For a DMX lighting setup that needs to bridge 5-pin and 3-pin XLR connections, the JOLGOO adapter combines the required connector conversion with a short, braided cable and reinforced connection points. The two-pack suits studio and stage users who want a practical way to link compatible mixed-connector fixtures and control equipment.