Intermerge Universal Silicone License Plate Frame Holder (2-Pack) — Rust-Proof, Rattle-Proof, Weather-Proof, 3 Drainage Holes
Product description
Overview
If your license plate frame is rattling, getting crusty around the edges, or just doesn’t seem to handle wet weather well, a silicone cover is a surprisingly practical fix. The Intermerge License Plate Frame Holder is a universal, U.S.-and-Canada sized silicone frame cover designed to slip over standard license plates without adding bulky hardware.
On paper, it’s built around the stuff most drivers notice: no rattle, less tarnish, and better water management thanks to drainage holes. It also aims to be street-legal by avoiding sticker/plate obstruction, which is where many aftermarket frames get annoying fast.
Key benefits you’ll actually notice
The design is a two-sides opening “slide-in” style, which generally means easier install than fiddly metal frames. You’re not dealing with a full-on frame swap so much as a protective cover that fits over the plate area.
A big day-to-day improvement is the inclusion of 3 drainage holes. That’s meant to help water release instead of pooling—so you’re less likely to see lingering damp spots after rain or car-wash cycles. If you live somewhere with wet weather or heavy de-icing conditions, that drainage detail matters.
It’s also pitched as rust-proof, rattle-proof, and weather-proof, with a TPU (premium TPU material) build. TPU typically offers flexibility and elasticity, and here it’s specifically described as maintaining performance across a wide temperature range (-60~250 degrees). Translation: it’s intended to stay more stable through cold snaps and heat without becoming brittle or warping.
What matters most about the fit (and where it can fall short)
This is marketed as a U.S. universal size license plate holder, sized at 12.4" x 6.4" and described as fitting standard-issue license plates in the U.S. or Canada. It also emphasizes “ZERO sticker obstruction” and “ZERO license plate obstruction,” plus a “won’t get stopped by the police” claim related to being 100% street legal.
That said, “universal” still depends on your specific plate setup. If your plate has a non-standard border, thick frame, or aftermarket mount configuration, you’ll want to compare your plate dimensions and how much clearance you have before buying. It’s also worth checking how it aligns with your back up camera area—this cover is described as not blocking a back up camera, but only your vehicle’s exact placement will confirm that.
Material and protection: scratch control vs. expectations
Compared to metal license plate frames, this silicone cover is designed to fit snugly and help prevent scratching. If you’ve ever seen a metal frame that vibrates and leaves light scuffs over time, this kind of soft-fit protection can feel like a step in the right direction.
It’s described as thick and sturdy, with the goal of protecting your plate from scratching and deforming. Still, silicone covers can’t magically fix damage that already exists. They’re more about prevention and keeping things looking clean than restoring a worn plate.
Installation, maintenance, and everyday use
Installation is straightforward on the intended design: use the two side openings to slide it in. Once it’s seated, it’s meant to resist rattle—so instead of hearing that metal-on-metal sound when you hit bumps, the cover should stay quieter.
In daily use, the drainage holes can reduce the “wet plate look” that sticks around after storms. After a wash, you’re less likely to see water trapped in the frame area.
Quick practical example: after a drive through rain, a metal frame can leave water sitting along the lower edge. If this silicone cover drains as intended, the plate area should dry more evenly, which also helps avoid tarnish-like buildup around the bottom.
Tech specs
- Type: License plate frame holder / cover (silicone TPU)
- Size: 12.4" x 6.4"
- Material: TPU (premium TPU)
- Features: Rust-proof, rattle-proof, weather-proof
- Drainage: 3 drainage holes
- Temperature range: -60~250 degrees
- Pack: 2-pack
When it makes sense to buy
It’s a solid pick if you want a universal license plate cover that focuses on quiet fit, weather resistance, and scratch prevention, especially if your current setup rattles or traps water.
It may be the better route than a basic metal frame approach if your main priority is reducing noise and minimizing tarnish/rattle issues without doing a complicated install.
When you should skip it
It might not be a great match if your vehicle’s plate mounting setup is non-standard, your clearance is tight for a camera-related area, or you need something that includes additional mounting hardware (this is described as a slide-in cover/frame holder, not a full hardware kit).
Final verdict
Worth it if you’re aiming for a quieter, weather-friendly license plate setup with a snug, scratch-minimizing TPU cover and built-in drainage. You’ll likely appreciate it most if your current plate frame is prone to rattling or holding onto water.
However, if your plate or mounting configuration isn’t truly “standard-issue” in practice, you may find the fit less seamless than you want. In that case, double-check your plate dimensions and how the cover sits around any camera clearance before you commit.
FAQ
Is it really universal for U.S. and Canada plates?
It’s described as fitting standard-issue license plates in the U.S. or Canada, with a size of 12.4" x 6.4". Still, if your plate setup is non-standard, it’s smart to verify the fit against your plate.
How does it handle water after rain?
It includes 3 drainage holes intended to release water rather than trapping it around the plate area.
Is it meant to stop rattle and vibrations?
Yes—the holder is advertised as rattle-proof and designed to fit snugly.
Will it block a back up camera?
The description says it doesn’t block your back up camera, but it’s best to confirm with your vehicle’s camera placement.
What material is it made from?
It’s made from TPU (premium TPU), described as elastic and flexible across a -60~250 degrees temperature range.