BGGTMO Black American Flag License Plate Frames (2-Pack) — Rustproof Aluminum Composite Tag Holder with Screws
Product description
The essentials
If you’re the type who notices small details—like plate frames that rattle, look worn out, or let noise creep in—these BGGTMO black American flag license plate frames are built to address that. They’re a 2-pack set for the front and rear, designed as slim license plate holders meant to fit the standard US license plate size (12 by 6 inches is referenced in the description).
On paper, the main draw is durability and finish. The frame uses a rustproof brushed aluminum-plastic composite panel with double-sided aluminum, and it’s paired with a black foam backing pad to help reduce noise and protect the plate from scratches. The flag emblem is screen printed and described as UV-proof and waterproof, which matters if your car sits outside a lot.
That said, it’s not a “magic fix” for every installation situation. The description notes screw size compatibility may vary, so it’s smart to double-check your plate holes and hardware fit before you tighten everything down.
Key features that show up day to day

The design is intentionally slim, with 4 thin edges that the description says won’t block the registration sticker on the 4 corners of the metal plate. In real terms, this is the kind of detail that can save you from that annoying look of a partially covered sticker.
The frame also focuses on quieting and protection. The black foam license plate pad is pasted on the back of the plate to reduce rattle proof noise (the wording is a bit loose, but the intent is clear) and help prevent rubbing damage.
Visually, you get a patriotic black-themed look with a screen-printed USA flag emblem. It’s not just branding—it’s meant to stay looking consistent, since the emblem is described as UV-proof and waterproof so you’re less likely to see quick fading compared to simpler prints.
Tech specs (what to know before you buy)


- Frame material: rustproof brushed aluminum-plastic composite panel with double-sided aluminum
- Emblem: screen printed, described as UV-proof and waterproof
- Frame design: slim edges intended not to block corner registration stickers
- Intended license plate size: designed according to 12 by 6 inch US standard license plate
- Included hardware: license plate screws and nylon inserts
- Bolt/screw size mentioned: M6 by 20mm (1/4 by 3/4 inch) long
- Pack size: 2 frames (front and rear)

Where these frames make sense—and where they might fall short
It’s a solid pick if you want a cleaner, sturdier plate frame setup that’s meant to resist rust and reduce plate rattle, without creating a bulky border around your plate. The black foam backing is the kind of “small upgrade” that can make the front end feel a bit calmer over bumps.
It may not suit you if your car’s plate mounting setup doesn’t line up with the referenced screw/bolt spec. The listing also mentions they can replace screws if the screw size doesn’t fit your license plate, but that still means you should plan to verify fit up front.
Also worth noting: the frame is built around the standard 12 by 6 inch license plate approach. If your situation is non-standard, you may have to look elsewhere.
If you’re choosing between an ultra-basic plastic frame and something more “car-like” in feel, this sits closer to the practical upgrade side. It’s not positioned as a premium custom showpiece, but it does aim for real-world durability.

Installation reality check (quick, practical)
The description says mounting hardware is included: license plate screws and nylon inserts. That’s helpful because you shouldn’t need to hunt down compatible fasteners. For most cars that use the common M6 by 20mm style mounting, it should be straightforward to line up the 4 holes, insert screws, then secure.
A quick micro-test before fully tightening: hold the frame in place, make sure the corners clear the registration sticker area (since that’s a stated goal), then confirm the holes align with your plate.


Worth noting about extras (and what’s not included)
This product is primarily about the black American flag license plate frames with included screws and nylon inserts. The base description also mentions other accessories (like 2-pack blue line car decals made from 3M vinyl and black flag tire valve caps made from aluminum alloy), but the provided product name emphasizes the 2-pack front/rear license plate frames.

So before you assume you’re getting the decals and valve caps, it’s worth checking what’s listed as included for this exact item on amazon US—because buyers hate surprises, and this is one area where listings can vary.
Buying verdict
It’s worth considering if you want rust-resistance, a slim profile that’s intended not to block corner registration stickers, and a foam backing that targets noise and scratch protection.
You may want to skip it if your license plate mounting holes or screw spec don’t match what’s referenced (M6 by 20mm). And if your plate isn’t the standard 12 by 6 inch format the listing is based on, this may not sit right.
If you’re someone who just wants the plate to look sharp and stay secure without rattling, this set fits that use case. If you’re picky about perfect alignment on a non-standard setup, you’ll want to double-check compatibility first.

FAQ
FAQs


1) Are these front and rear frames included?
Yes—this is a 2-pack described as front and rear license plate frames.
2) Will the frame block the registration sticker on the corners?

The description says the slim edges are designed not to block the registration sticker at the 4 corners of the metal license plate.
3) What hardware comes with the frames?
The listing says it includes license plate screws and nylon inserts.
4) What if the screws don’t fit my plate?
The description states you can contact the seller for a refund or replacement screws if the screw size doesn’t fit.
5) Is the flag emblem resistant to fading and water?
The emblem is described as screen printed and UV-proof and waterproof to help prevent fading/aging concerns.
Products with discounts that might interest you
- Premium Matte Black License Plate Frames (2-Pack) — Rust-Resistant Stainless Steel, Rattle-Free Slim-Top Design
- QiqaMole QM-LPF Silicone License Plate Frames, Purple 2-Pack with Drainage Holes
- HECASA Front Grille Mesh PP Plastic
- REEVAA Tesla Model Y Mud Flaps, 2019–2024, 4-Piece PP/TPE Clip-On Set
- Orion Motor Tech Tailgate Assist 2004-2014 🚚
- Rico Industries NCAA Premium 12" x 6" Chrome License Plate Frame (with Plastic Inserts) - TCU Horned Frogs
- ZXFOOG Carbon Fiber License Plate Frame (4-Hole) — Slim Black Stainless Steel Frame, Handcrafted Cloth-Wrapped, 1 Pack
- RVSNAIL RV Awning Replacement Fabric, 16-Foot Fit, 15'2" Wide Vinyl
- Nilight 200PCS Car Retainer Clips Kit (6–10mm)
- SEVEN SPARTA 1102 Roll Bar Grab Handles for 2021–2026 Ford Bronco, 4-Pack
- TRQ Trunk Lid Lift Support Set for 2003–2007 Cadillac CTS
- StarknightMT Ranger XP 1000 Clear Polycarbonate Rear Windshield
- Wigoo US-W-C-TCZY-YB1 Tesla Model Y Roof Sunshade, Black, Two-Piece
- Xenjum RV Awning Fabric -17F 18FT Replacement, 5-Layer Rip-Stop Vinyl
- Xprite ZS-0117K-RY Matte Black Jeep JK Replacement Grille with Mesh
- aggauto Universal Grill Mesh 40x13
- Amiss Bling License Plate Frames, 2-Pack White Stainless Steel with Crystal Rhinestones
- ARANA 81161C1000 Hood Lift Supports for Hyundai Sonata, Pair
- GOOACC 425 Pcs Car Body Retainer Clips Set: 19 Sizes with Remover for GM, Ford, Toyota & More
- Intermerge License Plate Frames 12.4x6.4
- GOOACC 100-Piece Push-Type Retainer Clips (7mm, 8mm, 10mm) for Subaru + Bonus Remover
- GOOACC GRC-70 35PCS Splash Shield Fastener Kit
- Orion Motor Tech F-150 Tailgate Assist 2015
- AggAuto Universal 40x13 Car Grill Mesh

