FBJTDQ Carbon Fiber License Plate Frames, 2 Pack – Black ABS Front & Rear Set with Hardware & Stickers
Product description
What this is and what problem it solves
FBJTDQ’s Carbon Fiber License Plate Frames come as a 2-pack of black plastic frames that bundle front and rear mounting with hardware. They add a carbon fiber texture and gloss to your plate, offering a more tailored, premium look without ceramic or metal costs. If you want to refresh the appearance of your license plate while keeping a practical mounting solution, this kit aims to deliver a simple upgrade that stays out of the way of regulatory stickers and plate visibility.
How it helps in everyday use

The frames are built from ABS plastic with a carbon fiber aesthetic, designed for steady plate mounting with a universal 4-hole pattern (6 x 12 inches). The kit includes 8 M6×20mm machine screws and matching carbon fiber screw caps so you don’t have to source them separately. The intent is a secure, stable fit that minimizes rattling and keeps your plate oriented correctly during daily driving.
What stands out (pros)
- Carbon fiber texture on a durable plastic frame for a more premium look without the cost of metal.
- Universal 4-hole design fits most vehicles, front and rear plates are covered in one package.
- Includes all necessary mounting hardware and caps, reducing setup time.
- The kit also contains black license plate pads to help prevent rattling and protect paint from contact.
- Bonus: handlebar stickers included, offering a small cosmetic option for other areas like door handles or mirrors.



What may give you pause (cons or limitations)
- The source notes varies by local traffic laws, in some states or provinces, license plate framing could shadow stickers or characters. It’s important to verify local regulations before purchase.
- As with most generic universal frames, fit may vary on special or non-standard vehicles. Always verify compatibility for unusual models before buying.
- The aesthetic is a specific carbon fiber look on plastic, if you’re aiming for metal or a fully stealth frame, this may not be the best option.
Who this is for

If you’re seeking an affordable upgrade to a standard license plate frame that nudges your car’s appearance toward a sportier edge, this 2-pack could fit nicely on a typical sedan, SUV, or light truck. It’s probably best for drivers who want a visible texture and a clean finish without changing the mounting approach or dealing with high-end materials.
Who might want to pass
Not ideal if you need a heavy-duty metal frame for extreme conditions or if your local rules restrict certain frame styles. If you prioritize a flawless, no-gap, premium metal finish, you may prefer other options.



When it makes sense to buy
If you’re buying a two-plate upgrade at once and want hardware included, plus a simple installation that keeps plate stickers visible, this kit aligns well with that goal. It’s a reasonable pick for a mid-range, appearance-focused upgrade that stays practical for daily driving.
What to check before purchase

- Confirm the 6 x 12 inch standard plate size matches your plates.
- Look at your vehicle’s mounting area to ensure the universal 4-hole pattern will sit flush.
- Review your state/province rules about frame visibility and sticker coverage before installing.
- Consider whether you’ll use the included handlebar stickers or prefer a more minimal look.
Practical usage example
Imagine swapping out a plain black frame for this carbon fiber styled set. The install is straightforward: align the four holes, secure with the included M6 screws, snap on the caps, and you’re done. The pads help reduce plate rattling as you drive, a few miles later, you glance at the plate and notice a more refined, cohesive look with minimal effort.



FAQ (based on available data)
- Does it fit both front and rear plates? Yes, it’s designed for front and rear plates with a universal 4-hole design.
- Are the screws included? Yes, the kit includes eight M6×20mm screws and carbon fiber caps.
- Will it protect paint on the car door area? The kit includes handlebar stickers and pads that can help protect surrounding paint where applicable.
Final verdict
Is it worth it? Worth considering if you want a budget-friendly upgrade that delivers a carbon fiber aesthetic and straightforward installation, with hardware included. It suits drivers who want a unified front-and-rear frame setup and don’t expect metal durability. If you prioritize a non-metal, subtle enhancement under legal constraints, this kit offers a reasonable balance between look and practicality.
What you’ll notice in day-to-day use
You’ll get a more textured, glossy appearance on your plates without obstructing corner stickers, alongside a quieter, more secure mounting thanks to the included pads. The overall impact is a cleaner, more polished look that doesn’t require fancy tools or additional purchases.
Quick takeaway
A practical upgrade for budget-conscious buyers who want a carbon fiber vibe and complete hardware, with a caveat to verify local framing rules and vehicle compatibility before installing.
Products with discounts that might interest you
- Fender Flares for Jeep Gladiator JT 2020-2024 🚙
- COMNOVA AUTOPART 15655H6-BLK-8-C Running Boards, 6-Inch Non-Slip Steps
- XYcustomBest License Plate Frame, 12" x 6
- GOOACC GRC-44 Nylon Bumper Fastener Clips, 8mm Push-Type, with Remover
- 240PCS Car Bumper Retainer Clips Kit - Auto Plastic Rivets & Push Fasteners Set
- JinnEterri 242PCS Car Bumper Retainer Clips Kit, 12 Sizes and 5 Removal Tools
- NICECNC Rear Fender Cover 6061 Aluminum
- KEMIMOTO UTVB0110-02001 Rear Windshield, Clear Hard-Coated Polycarbonate
- Polished Mirror Chrome Thin License Plate Frames (2-Pack) — Stainless Steel, Rattle-Free, Rust-Free, Street Legal
- LASFIT XS-FD09D Tailgate Mat for Ford Ranger, TPE All-Weather Liner
- ECOTRIC 2-Pack Trailer Fenders with Steps for Single-Axle Trailers (Black, Fits 13" Wheels)
- LivTee Carbon Fiber License Plate Frames, Stainless Steel, Slim 4-Hole Design
- Mega Racer af-LFBL-1Pc-c1 Matte Black License Plate Frame, Thin-Top Metal Design
- MICHELIN MLLCL026 Tailgate Protector for 2022–2026 Ford Maverick, TPE
- MTABCTY License Plate Frames, Black Stainless Steel 2-Pack with Screw Caps
- Nilight Hitch Step 23.5" for 2" Receiver
- Starlink Mini Flat Magnetic Roof Mount, 220 lbs
- QiqaMole QM-LPF Silicone License Plate Frames, Purple 2-Pack with Drainage Holes
- BGGTMO License Plate Bracket Holder 6x12
- Aujen Silicone License Plate Frames 2-Pack
- BASENOR 2026 Tesla Model Y mud flaps 2025
- Intermerge Universal Silicone License Plate Frame Holder (2-Pack) — Rust-Proof, Rattle-Proof, Weather-Proof, 3 Drainage Holes
- BASENOR Highland Mud Flaps for Tesla Model 3 (2024–2026) – Set of 4, No Drilling, All-Weather Protection
- Orion Motor Tech Tailgate Assist for 07-19 Silverado & GMC Sierra: Smooth, Safe Lift Despite Heavy Use

