FORIOUS 8-Inch Widespread Bathroom Faucet, Oil-Rubbed Bronze, 2-Handle
Product description
For a bathroom vanity with three faucet holes, the FORIOUS 8-inch widespread faucet pairs an oil-rubbed bronze finish with separate hot and cold handles. Its 6–12-inch hole-spacing range makes it relevant when replacing a widespread faucet or planning a sink setup around that layout.
It comes with a pop-up drain and flexible supply lines, so several installation components are included. Check the sink and surrounding clearance before choosing it.
Everyday use
The two lever handles let you adjust water flow and temperature separately. That familiar layout may suit a shared vanity or anyone who prefers distinct hot and cold controls. In contrast, a single-hole faucet is designed for a different sink layout and may be the more practical route when the vanity has only one faucet opening.
This model is intended for a three-hole widespread installation, with recommended hole spacing of 6–12 inches. The faucet is 5.6 inches tall, and the product details call for more than 5.8 inches of clearance to a mirror or cabinet. Those measurements matter when the faucet sits beneath a low mirror or shelf. The listing also specifies a 1.1-inch minimum and 1.38-inch maximum hole diameter, plus a sink-hole thickness of 1.2 inches.
The product information gives two aerator flow figures: 1.2 gpm at a maximum of 60 psi, and a replaceable 1.8 gpm aerator. It does not clarify which figure applies to the aerator as installed, so confirm that detail if flow rate is central to your choice.
Spec sheet
- Name: FORIOUS Bathroom Sink Faucet
- Type: 8-inch widespread, three-hole bathroom faucet
- Color: Oil-rubbed bronze
- Finish: Oil-rubbed
- Material: Stainless steel
- Handles: 2
- Faucet height: 5.6 inches
- Recommended hole spacing: 6–12 inches
- Hole diameter: 1.1-inch minimum, 1.38-inch maximum
- Sink-hole thickness: 1.2 inches
- Flow rate: 1.2 gpm at a maximum of 60 psi, listing also mentions a replaceable 1.8 gpm aerator
- What’s included: Pop-up drain, 24-inch hot and cold PEX supply lines with 3/8-inch threads, installation hardware, handles, aerator, and instruction manual
Benefits
The included drain and supply lines mean the package covers more than the faucet itself, which can be useful when replacing an existing vanity fixture. The listed supply lines have 3/8-inch threads for standard U.S. connections. Installation instructions and hardware are also included, although the product details alone cannot establish whether a particular sink or plumbing setup will need additional parts.
The listing describes a ceramic disc cartridge and says it passed 50,000-cycle leak tests, that is a reported test claim, not a guarantee about every installation. It also describes a five-layer protective coating intended to resist rust and fingerprints. The product information identifies NSF372, cUPC, and DOE water-saving certifications, and describes the aerator as designed to reduce splashing.
Is it worth it?
Worth considering if your sink has three holes within the stated spacing range, you want separate hot and cold handles, and the bronze finish suits the rest of the vanity. The included pop-up drain and supply lines add practical value to a replacement project, while the specified height and clearance give you concrete measurements to compare against the space.
Not the best choice if your sink is designed for a single-hole faucet, or if the available mirror or cabinet clearance does not meet the stated requirement. The aerator details are also inconsistent, so this is a less straightforward pick if you need a confirmed flow rate before buying. Choose it for a compatible widespread layout and the included components, for a different mounting pattern, a faucet made for that sink is the simpler match.