Exit Only Do Not Enter Sign 12 x 18 Inch
Product description
If you need to make an exit-only route obvious, a reflective sign is more useful than a notice people may miss after dark. This two-pack is designed to mark vehicle exits and discourage drivers from entering the wrong way.
The signs have red-and-white lettering on 12 x 18-inch aluminum panels. Their message is direct, which helps when drivers need to understand the restriction at a glance.

If you prioritize visibility in low light, the reflective finish is the standout feature, if you prefer a temporary notice you can move around, a mounted metal sign is a less flexible choice.
Where it shines



These signs are intended for locations where traffic should leave through one route but not enter through it. Think of a driveway, yard entrance, gate, or business exit: placed where an approaching driver can see it, “Exit Only - Do Not Enter” spells out the direction of travel without relying on a verbal reminder.
The red-and-white design and reflective surface are meant to make the wording easier to spot, including at night. That can be helpful when headlights reach the sign, though visibility still depends on placement and the driver’s line of sight. The two-sign pack can also suit separate points along the same route, such as an entrance and a gate, if both need the same warning.

Worth considering if you want a fixed, readable reminder rather than a basic paper notice. The aluminum is described as rust-free, waterproof, and dust-proof for outdoor use, and the sign is UV printed. Those details make it a more durable-looking approach than a temporary printed sheet, without establishing that it meets any particular traffic-sign standard.
What to know



Each panel measures 12 x 18 inches and is made from thick aluminum. Two pre-drilled holes are provided for mounting to a wall, fence, or gate. That makes installation more straightforward when you already have a suitable surface and mounting method, but the listing does not specify mounting hardware. Check that the intended location can accept the holes and that the sign will be positioned where drivers can read it before reaching the exit.
The listing describes the finish as highly reflective, but it gives no reflectivity rating or visibility distance. “On the spec sheet,” that supports treating nighttime visibility as a useful feature, not a guarantee that the sign will be clear from every approach or in every lighting condition. It also does not provide details about local sign requirements, so a property that needs compliant traffic control may require a separately specified sign.

It’s not for you if you need a portable warning, a custom message, or documented compliance with a particular sign standard. The wording is fixed, and the two-hole mounting design points toward a more permanent placement.
Best use cases



Use one where a vehicle could mistake an exit for an entrance: on a gate, fence, or wall beside the route, oriented toward incoming traffic. For example, if a driveway loops past a one-way exit, mounting the sign where a driver turns toward that exit gives the message a chance to register before they enter against the intended flow. Avoid placing it where landscaping, parked vehicles, or the gate itself would block the view.
The pair makes sense when two spots need the same instruction. If only one location needs a warning, a single sign may be all the installation calls for, if you need a larger or regulated traffic-control solution, look for specifications that address those requirements directly.
Final verdict
This is a practical fit for property owners or businesses who need a fixed “Exit Only - Do Not Enter” message, outdoor-ready aluminum, and reflective lettering in one package. The two pre-drilled holes simplify the mounting plan, but you’ll need a compatible surface and hardware, and the listing does not establish compliance with official traffic standards. Buy it for clear private-property direction, choose a different sign when portability, custom wording, or documented regulatory requirements matter more.
Products with discounts that might interest you
- Food Warming Mat, 24" × 15
- Glass Vials, 10 mL
- Drill America Plug Tap, M18 x 1.5
- Hazmat Suit Hooded Coveralls
- NUTCITY Food Warming Mat 40" x 15
- Silicone Waffle Molds, 4.65 x 2.76 Inches
- i-CowFun Aluminum Number Sign, 12" x 8
- Mojgar Commercial Ice Maker, 33 lb ice bin
- Wire-Reinforced PVC Hose 1/2-Inch ID
- SEESII Electric Suction Cup, 8-Inch
- Felizlab Outdoor Trash Can Deodorizer, 1.5 lbs
- Medical Nation Disposable Coveralls, Microporous Film
- NAXBEY Food Warming Mat, 23.6 x 15 in
- Omezizy Thermal Shipping Labels, 4x6 Inches
- 3DHoJor PLA+ 3D Printer Filament 1.75mm
- Amoybaby Silk PLA Filament 1.75mm
- IEMAI PETG 3D Printer Filament 1.75mm
- Creality TPU 3D Printer Filament 1.75 mm
- ANYCUBIC PLA Filament 1.75mm
- Lab Syringes 1 mL
- SWRT Fluorescent Gaffer Tape, 0.6 in
- eSUN PLA Filament 1.75mm
- ANYCUBIC 3D Printer Resin, 1kg
- Comgrow Filament Dryer SH03

